Fzr 1000 exup J Reg no spark

[AndrewCBaker]

Hi there from a late newby, Pls help!!!!

I bought this FZR 1000 exup J reg, 140 thousand miles, been stood for 10 years +,stripped it down, tank off,airbox off, carbs are in amazing condition, all free, and cleaner than you would definately expect..............
After getting down that far, thought as the carbs were free, and clean and no apparent crap or sticky old fuel, me and pal would attempt to spin it over with some easy start!!
Spins lovely, but not firing!!
Started to remove plugs, im getting NO spark from any, after a bit of fiddling, run switch chk, stand etc, i kept looking at at this box, called digital ignitor, thought after reading up this was the culprit, found 1, waited to arrive, arrived and plugged in, No difference!!
What could it be PLSSSS

[Goshreally2]

I had to go through nearly all of the components on my genesis 87 to get a spark. Voltage checks( showing any breaks or shorts) resistance checks on components. Mine was the ignitor. Hopefully one of the exup owners will pick up on this soon, there are some really decent users here. Until I did all the checks I couldn't really narrow it down. I did find a couple of nasty connections and added wires by the previous owner which also had to be corrected to get a result. Good luck.

[Teego]

Nuggitt or Stig, could you move this thread to the appropriate forum so we can contribute?

[Stig]

Sorted

[AndrewCBaker]

Hi good morning where will this now be moved to so i can follow and hopefully resolve, thanks

[Goshreally2]

Some useful info. was given to me on my genesis 87 thread and in workshop again about genesis. Some of the info. was related to exup, maybe there is something of help in those posts. The starting procedure was good to know i.e does the sidestand or clutch switch affect starting.