YZF750r EXUP cables

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
machman111
Brolly Dolly
Brolly Dolly
Posts: 2
Joined: Sun Jul 24, 2016 3:28 pm
Location: Essex UK

YZF750r EXUP cables

Post by machman111 »

Hi all.
I have a 94 YZF that someone has blanked off the EXUP valve somewhere along the line.
I have the parts to put it right but I'm struggling to find any info as to which cables go where.
Thanks for any advice in advance.
Top
User avatar
Stig
Site Admin
Site Admin
Posts: 11811
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

If you're after cable routing there's a diagram in the workshop manual that can be found in the tech section on the main site

I have several R1 cables kicking about if they're long enough and any use to you. That may need new inners tho
AKA Bald headed b'stard
Top
machman111
Brolly Dolly
Brolly Dolly
Posts: 2
Joined: Sun Jul 24, 2016 3:28 pm
Location: Essex UK

Post by machman111 »

I have good cables & have just noticed that the part numbers have 1 & 2 on them which I assume correspond to position2 1& 2 on the servo.
Thinking about it, i can probably work out which does what at the valve.
thanks for the heads up on the manual.
Top
Post Reply

Return to “Workshop”