Replacement panels

Start a discussion about anything you like here. Newbies please note, it's your round!
Post Reply
Davektm
Brolly Dolly
Brolly Dolly
Posts: 10
Joined: Thu Feb 01, 2018 5:43 pm

Replacement panels

Post by Davektm »

Does anyone do new replacement panels for 89 EXUP's? I know complete panel kits were available from China for older 400's but not sure if they ever made anything for EXUP's?
Top
User avatar
Stig
Site Admin
Site Admin
Posts: 11829
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

I've seen fibreglass items including top cowl but can't remember who makes them

Maybe someone might be able to shed some light
AKA Bald headed b'stard
Top
User avatar
nugget
Moderator
Moderator
Posts: 5992
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nugget »

I seem to remember Karl ( undeadhairy) buying a tophalf fairing from them. I'll have look through my files. I usually save daft stuff like that. As Arnie would say I'll be back. :lol:
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
skelly
Ear-Plug Cleaner
Ear-Plug Cleaner
Posts: 30
Joined: Wed Jan 24, 2018 2:58 pm
Location: Ilkeston Derbyshire

Post by skelly »

http://www.perfect-fairings.com/en/prod ... g-cowl_220

Any use ?
Take the best and make it better.
If it doesn't exist, invent it.
Top
User avatar
nugget
Moderator
Moderator
Posts: 5992
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nugget »

They are the ones Karl got. :thumbsup: Well done Skelly.
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
User avatar
nugget
Moderator
Moderator
Posts: 5992
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nugget »

If I was to say anything negative about these panels. It would be... When I saw Karls top half fairing that he'd fitted from this company. I noticed it wasn't a good join where it meets up with the side engine panels. (Where the three bolts are that attach it)
There was a 5mm gap at one end. I also noticed that the mould they use looks a bit rough and ready. They'll need a bit of rubbing down to get them to a nice smooth finish. If you bought the top half fairing and side panels together you could maybe make them fit a bit better. Just my tuppence worth. :nod:
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
Davektm
Brolly Dolly
Brolly Dolly
Posts: 10
Joined: Thu Feb 01, 2018 5:43 pm

Post by Davektm »

Thanks guys. I'm weighing up options with this thing whether to sell complete, break or put these panels on and make a decent bike out of it
Top
TTSUPERSTOCKER
Brolly Dolly
Brolly Dolly
Posts: 17
Joined: Fri Feb 06, 2015 10:28 pm
Location: United Kingdom

replacement fairing

Post by TTSUPERSTOCKER »

have a look at Moorespeed Racing
Top
Post Reply

Return to “Lounge Bar”