Shocker - The old girl in bits

Post your pictures here: your bikes, meets you've attended, modifications you've made, x-rays you've had taken...
Post Reply
User avatar
Lukather
Pit-lane Reporter
Pit-lane Reporter
Posts: 732
Joined: Sat Jul 25, 2009 12:19 pm
Location: sent to bed early
Contact:

Shocker - The old girl in bits

Post by Lukather »

gettin there - wheels off and split for Enamellers rear end down and cleaned new shocker - new bearings finlter and sintered pads in post.
Bought buffer for polishing. Exhaust off for painting !

Image

Image

Image

Image

New shocker !

Image

Old shocker !

Image
Image


Any suggestions on whether tO spray exhaust or paint ?
Painting disc carriers ? Anyone done it ?
Anyone painted / sprayed brake calipers ?colours? can you do on bike ? ?

Thanks
AN.OK
Test Rider
Test Rider
Posts: 299
Joined: Mon May 16, 2011 8:25 pm

Post by AN.OK »

Better finish spraying :)
Whoever you vote for government still wins.
rob w
Test Rider
Test Rider
Posts: 319
Joined: Sun Jun 26, 2011 12:32 pm
Location: Teesside & Bristol

Post by rob w »

Isn't the exhaust chrome under the black paint?
Mk1 Yam R1, Mk1 EXUP, Duc 916, Blackbird, Kaw Z1, Kaw Z1a, Triumph 900 Daytona & 60's T120 Bonneville (cafe racer with a tuned T140 motor) Aprilia Pegaso, VFR750, Honda XL1000 Varadero
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Just resprayed my Tiger calipers after a rebuild, i used Satin black Hammerite, available in other colours.
Rutz is my friend.
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

I did mine off the bike, as i rebuilt them with new seals etc.

Image
Rutz is my friend.
User avatar
Stig
Site Admin
Site Admin
Posts: 11811
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Re: Shocker - The old girl in bits

Post by Stig »

Lukather wrote:
Any suggestions on whether tO spray exhaust or paint ?
Painting disc carriers ? Anyone done it ?
Thanks
The front part of the exhaust is stainless and only the collector box cast and rusts. You could clean the main section and then just spray the cast with PJ1 or BBQ pait to tidy it up

As for the carriers, i've done my centres when the rotors were split off but have also done carriers and carefully masked off all the bobbins etc (PIA but worth the time). Sprayed mine with a rattle can
AKA Bald headed b'stard
Post Reply