stupid bike or stupid me?

Post by **nugget** » Tue Mar 27, 2018 5:03 pm

Yes and I like the spray job.

Teego · Post by **Teego** » Tue Mar 27, 2018 5:09 pm

nuggitt wrote:Here's a photo of the nipple. It's under the rubber cap. (Which I didn't take off)

Aaahhhh, so that's what a Dutch cap is.

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 5:18 pm

Just been on phone to my local bike shop to see if they could get the seal kit and they say the slave master system is on the handle bars :/ I don't think they know much about bikes. Is that kit definitely the right one if I order it from eBay? Many thanks

Teego · Post by **Teego** » Tue Mar 27, 2018 5:24 pm

Justincoleman wrote:Just been on phone to my local bike shop to see if they could get the seal kit and they say the slave master system is on the handle bars :/ I don't think they know much about bikes. Is that kit definitely the right one if I order it from eBay? Many thanks

The master cylinder is on the bars the slave is on the engine!!

Post by **nugget** » Tue Mar 27, 2018 5:28 pm

If its leaking from the bottom slave unit like you say then that's the one you need. When you catch up with things you could always change the one on the handlebars just for peace of mind. Then you know that job is all sorted.

oldskoolexup · Post by **oldskoolexup** » Tue Mar 27, 2018 5:29 pm

As Teego says, the SLAVEcylinder is bolted onto the sprocket cover of the engine, as shown in Nuggit's beautiful, quality photo!

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 5:30 pm

Ah right well when I clicked on the eBay link it says master slave cylinder seal kit? I need the slave cylinder seal kit then and not the master cylinder kit?

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 5:33 pm

https://imageshack.com/i/po6vz2oDp
Would that be the right kit?

Teego · Post by **Teego** » Tue Mar 27, 2018 5:36 pm

Justincoleman wrote:Ah right well when I clicked on the eBay link it says master slave cylinder seal kit? I need the slave cylinder seal kit then and not the master cylinder kit?

Forget ebay. Go to Wemoto. They know what they are about.
http://www.wemoto.com/bikes/yamaha/

oldskoolexup · Post by **oldskoolexup** » Tue Mar 27, 2018 5:37 pm

Teego wrote:
Justincoleman wrote:Ah right well when I clicked on the eBay link it says master slave cylinder seal kit? I need the slave cylinder seal kit then and not the master cylinder kit?
Forget ebay. Go to Wemoto. They know what they are about.
http://www.wemoto.com/bikes/yamaha/

ditto

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 6:08 pm

CLUTCH SEAL KIT

Here we go. Not a bad price to. Guessing this is the right thing I need?

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 6:11 pm

But saying that, the picture nuggitt put up looks different to the one that I found. Just don't wanna order the wrong thing

Teego · Post by **Teego** » Tue Mar 27, 2018 6:19 pm

Justincoleman wrote:But saying that, the picture nuggitt put up looks different to the one that I found. Just don't wanna order the wrong thing

Just phone them. They'll talk to you and sort you out.

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 6:27 pm

Yeah I think that will probably be the best and most sensible thing to do. I shall give them a ring tomorrow. Cheers lads. Do you have a Facebook page? Or is it just this forum?

Post by **Stig** » Tue Mar 27, 2018 8:02 pm

no facebook im afraid

I only joined FB to access parts in groups and links that my lad sent me
Don't DO friends coz im a miserable twat

Exup 1000

stupid bike or stupid me?

Who is online