Project number 3!

rf9rider · Post by **rf9rider** » Sat Apr 26, 2008 10:46 am

Started work on the spare tank, had to fill a tiny dent in right hand side, starting to rub down and remove the decals.

SprinterDave · Post by **SprinterDave** » Sat Apr 26, 2008 2:53 pm

Spare TANK...does it use that much fuel???????????????????????

rf9rider · Post by **rf9rider** » Sat Apr 26, 2008 10:01 pm

Nice and sunny here this afternoon so got a couple of coats of primer/filler on the tank and mudguard.

Yoda · Post by **Yoda** » Sat Apr 26, 2008 10:10 pm

You done a good job of getting that dint out. We got a fleet of vans at work if you want to start on them next.

rf9rider · Post by **rf9rider** » Mon Apr 28, 2008 4:40 am

Yoda wrote:You done a good job of getting that dint out. We got a fleet of vans at work if you want to start on them next.

Cheers mate, but i only do small dents.

Yoda · Post by **Yoda** » Mon Apr 28, 2008 10:57 am

You've seen them then.

nismo · Post by **nismo** » Mon Apr 28, 2008 2:09 pm

Looking good!

rf9rider · Post by **rf9rider** » Mon Apr 28, 2008 4:49 pm

Cheers all, this is turning into a longer job than i first thought, i`m having to wait for good weather to spray as my garage is full of junk/spares/bikes and have no room to spray inside.
Time for another clearout.

rf9rider · Post by **rf9rider** » Tue Apr 29, 2008 5:03 am

I did ask about but no-one i know does spraying, so i thought i`d give it a go myself, my biggest problem is if i start a job i have to do it all at once, but this painting lark needs a lot of patience, waiting for stuff to dry etc.
At least i`ll have the satisfaction of knowing i did it myself, but if it goes all tits up i`ve wasted time and money, and end up paying for a proper job.

rf9rider · Post by **rf9rider** » Fri May 02, 2008 10:47 pm

Well Chaps. had a busy couple of days, got the tank and mudguard primered and top coated.

rf9rider · Post by **rf9rider** » Fri May 02, 2008 10:50 pm

Almost there, got them both flatted back, and fitted the decals.
Not 100% perfect but i`n happy with the result, especially the tank.

rf9rider · Post by **rf9rider** » Fri May 02, 2008 10:53 pm

rf9rider · Post by **rf9rider** » Fri May 02, 2008 10:57 pm

Mrs RF9 (bless her) has let me keep them in the new conservatory over night so they`ll be ready for final coats of laquer later tommorrow.

Then they`ll be left for a couple of weeks to harden before final flatting and polishing.
Should be ready when i come back from holiday next week.

rf9rider · Post by **rf9rider** » Fri May 02, 2008 11:00 pm

Having to have a rethink on the seat panels, as the speedblock decal wasn`t long enough to have the end piece on the rear end.

FZR..AL · Post by **FZR..AL** » Fri May 02, 2008 11:02 pm

Looking preety damn good them Mark...did u use halfords aerosols in the end?...should look really smart once lacquered,good on ya mate

Al

Exup 1000

Project number 3!

Who is online