BarflysR1

Grim Reaper · Post by **Grim Reaper** » Fri Apr 06, 2007 12:49 am

I was thinking of doing something like this eventually but hoping to keep the majority of the fairing. How do you hide the wiring on the left hand side when you take the fairing off?
Any good pics stevierst of left side please

The bike by the way...not you personally

barfly · Post by **barfly** » Fri Apr 06, 2007 8:27 am

Tuck them under the tank and airbox then run them between the frame and rad

stevierst · Post by **stevierst** » Fri Apr 06, 2007 3:14 pm

barfly wrote:Tuck them under the tank and airbox then run them between the frame and rad

^^^That's pretty much it really.^^^

mine's not exactly the neatest though. I'll get you some piccy's in a mo.

stevierst · Post by **stevierst** » Fri Apr 06, 2007 3:45 pm

Well here goes.

That's all the cables on the L/H/S going under the tank.

You can just see the cables route either side of the headstock going under the tank.

And the right hand side.

scar_biker · Post by **scar_biker** » Fri Apr 06, 2007 6:09 pm

V Tidy

Grim Reaper · Post by **Grim Reaper** » Fri Apr 06, 2007 8:11 pm

Thanks guys

stevierst · Post by **stevierst** » Fri Apr 06, 2007 9:45 pm

scar_biker wrote:V Tidy

Yeah, throttle cables are a bit short though. room for improvement there methinks.

barfly · Post by **barfly** » Fri Apr 06, 2007 10:27 pm

stevierst wrote:
scar_biker wrote:V Tidy
Yeah, throttle cables are a bit short though. room for improvement there methinks.

I got some Bike It bars with a 30 mil rise and tilted the bars forward so that I'm comfy and it also drops some weight over the front

throttle still rolls ok even on full lock

stevierst · Post by **stevierst** » Sat Apr 07, 2007 12:04 pm

Yeah, i can get away with my cables as they are, but i fitted full size MotoX bars 'cos of my gibbon like arms

. The cables could be better routed if they were longer though.

barfly · Post by **barfly** » Sat Apr 07, 2007 12:43 pm

stevierst wrote:Yeah, i can get away with my cables as they are, but i fitted full size MotoX bars 'cos of my gibbon like arms . The cables could be better routed if they were longer though.

You can either go to Venhill or order them from here www.streetfighterstore.com I might still get longer ones I'll see how I ghet on with the standard ones for now though

robandhisace · Post by **robandhisace** » Sun Apr 15, 2007 9:38 pm

stevierst wrote:Yeah, i can get away with my cables as they are, but i fitted full size MotoX bars 'cos of my gibbon like arms . The cables could be better routed if they were longer though.

did you have any problems with your throttle cables mine run simliar to yours but my revs drop ok till they get to 2 grand then drop really slow

barfly · Post by **barfly** » Mon Apr 16, 2007 12:09 am

Have you ever lubed your cables they could be running dry of years of use maybe its time to change them for new ones..,if you do change them get hold of the lads at Streetfighter Store they sell the longer cables

Post by **Stig** » Mon Apr 16, 2007 6:41 am

don't bother replacing the cables....way too much money

get one of these....does them all (bit fiddly and messy...... but worth it)

ozzyfzr · Post by **ozzyfzr** » Mon Apr 16, 2007 7:58 am

Nice 1 Barfly, lookin good and I hope it goes as well as it looks

kiwi_r1 · Post by **kiwi_r1** » Mon Apr 16, 2007 8:02 am

Stig's Skip strikes again , according to Antiques Road Showm its a mid 18th century cigar trimmer !!!!

Stig wrote:don't bother replacing the cables....way too much money

get one of these....does them all (bit fiddly and messy...... but worth it)