Exup valve servo motor question

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
User avatar
Stig
Site Admin
Site Admin
Posts: 11811
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

Checking servo is working

Turn servo pulley wheel full in one direction. Then turn ignition power on and pulley wheel should reset to centre. Try other direction. If both self centre then servo is good.
There are plastic teeth inside the servo that sheer when the valve seizes. Some folk have swapped the gear over 180 degrees and successfully used the other unused area of the gear wheel. Also R1 gears are rumoured to fit
AKA Bald headed b'stard
Top
User avatar
Rockmonster
Technician
Technician
Posts: 169
Joined: Thu Sep 19, 2013 5:06 pm
Location: Hampshire.

Post by Rockmonster »

Thanks Stig :D
Top
User avatar
itsnotagenesis
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2277
Joined: Mon Oct 10, 2005 8:25 pm
Location: Paisley

Post by itsnotagenesis »

I didnt think the black widow aftermarket pipes had the exup valve in them
Top
Post Reply

Return to “Workshop”