PICKUP COIL REMOVAL

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
User avatar
YZF1000R-SPRINT
Test Rider
Test Rider
Posts: 318
Joined: Mon Jan 23, 2006 7:19 pm
Location: West Yorkshire
Contact:
Contact YZF1000R-SPRINT

PICKUP COIL REMOVAL

Post by YZF1000R-SPRINT »

Hey up, The pickup coil on my Thunderace engine is stuck in fast and I need this out cos the cuffing wire has snapped.
Previously they just sort of pulled out but this bugger is stuck in fast
Any ideas?
Top
User avatar
creedxup
Parts department
Parts department
Posts: 2580
Joined: Fri Oct 14, 2005 11:51 am
Location: hastings sussex

Post by creedxup »

Rotate it around a bit by tapping the part the bolt goes through, then you should be able to wiggle it out by alternately pulling the bolt hole side then the wire side.
1992 RU midnight blue, Wiseco 1070, 6 speed, r1 calipers, ducati discs , 157 bhp crank, Ohlins shock
Top
User avatar
YZF1000R-SPRINT
Test Rider
Test Rider
Posts: 318
Joined: Mon Jan 23, 2006 7:19 pm
Location: West Yorkshire
Contact:
Contact YZF1000R-SPRINT

Post by YZF1000R-SPRINT »

Mnaged to get this out, the only way was to insert a wood screw into it and pull (very hard) with a pair of mole grips.

The wire had snapped anyway so I wasnt bothered how this came out.

I've never had one stuck in like this, they normally just sort of wiggle out as you say
Top
Post Reply

Return to “Workshop”