clutch push rod seal removal

[two-stroke-brit]

i am rebuilding the slave cylinder and would like to replace the above seal.
can it be done and how do you get the pesky thing out .
thanks mark

[YAMAEXUP]

After removing the push rod then try screwing in 2 telf tapping screws, then twist & pull

https://www.fowlersparts.co.uk/parts/40 ... 9-b/clutch

Not had to do this on either of my bikes yet but i've heard others suggest this method

[two-stroke-brit]

yep thats pretty much how i ended up doing it.
thanks mark