Alright peeps? I noticed with my air box off that the carb slides don't all lift at the same time when I rev my engine. I've got it starting up & running nice & smooth now but it doesn't like a big handful of throttle, it bogs down, even with the air filter fitted. I haven't inspected them yet but I'm betting there are holes in at least 2 of the diaphragms.
I've seen a post on another forum where the owner had smeared some instant gasket over a hole on his diaphragm but it's very recent & I don't know if it will stand the test of time. Anyone done this or anything similar & had good results?
Carb diaphragm repair
-
Graham Crayon
- Scooter Boy
- Posts: 60
- Joined: Tue Oct 19, 2010 3:40 pm
- Location: Worcestershire
- Contact:
Carb diaphragm repair
Life's short & it's hard like a body building elf
This is the web page for the ones in America. There will be postage on top though.
BIKE BANDIT DIAPHRAGMS
BIKE BANDIT DIAPHRAGMS
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
