Can someone educate me please on what bearings are for where? I got the names from banners thread and can guess where the dogbone bearings go but which ones are for the spherical bearing and needle roller bearing.
Cheers
My 1st project. .
I stand corrected but I believe the sperical bearing is for the bottom of the shock area
This one is the equivilant from info supplied on the forum many moons back
http://www.splatshop.co.uk/shock-bearin ... e12pw.html
This one is the equivilant from info supplied on the forum many moons back
http://www.splatshop.co.uk/shock-bearin ... e12pw.html
AKA Bald headed b'stard
I been trying to make sense of it on ..
http://www.cmsnl.com/yamaha-fzr1000-198 ... ml#results
However when I check the part numbers the spherical bearing and needle roller bearing they come up as the same ?? http://www.ebay.co.uk/itm/252378523951 .. however using eBay for this check is probably where I'm going wrong ...
http://www.cmsnl.com/yamaha-fzr1000-198 ... ml#results
However when I check the part numbers the spherical bearing and needle roller bearing they come up as the same ?? http://www.ebay.co.uk/itm/252378523951 .. however using eBay for this check is probably where I'm going wrong ...
You can get the roller bearings numbered as 15 on the CSM site from these guys. Cheaper than ebay.
http://shop.marksman-ind.com/bhkm1730ju ... 3012-p.asp
Stigs spot on with where the spherical bearing goes.
http://shop.marksman-ind.com/bhkm1730ju ... 3012-p.asp
Stigs spot on with where the spherical bearing goes.
Last edited by nugget on Thu Oct 06, 2016 9:02 pm, edited 1 time in total.
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
One end of the dog bone is fitted to a bearing on the swing arm. The other bearing you're referring to don't fit there, it fits in the other end of the rocker arm where it bolts to the rear of the frame
Last edited by Stig on Thu Oct 06, 2016 8:03 pm, edited 1 time in total.
AKA Bald headed b'stard
Hello odbguy.
I borrowed your photo to try and put together where the bearings go. I've double checked what I've put and it's right. (I think so anyway)
In the post I wrote re the bearings I said bearings 15 also go in the swingarm. Sorry but I got that bit wrong. You need 2 bearings #3 for the swingarm. Sorry about that.
I borrowed your photo to try and put together where the bearings go. I've double checked what I've put and it's right. (I think so anyway)
In the post I wrote re the bearings I said bearings 15 also go in the swingarm. Sorry but I got that bit wrong. You need 2 bearings #3 for the swingarm. Sorry about that.
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
