Homemade exhausts for the RU

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:30 pm

As some of you are aware I've strapped a turbo to the RU earlier on in the year and I made a short curved pipe which was way to loud on long runs, early morning fire ups to go to work and general pottering around town disturbing the peace, so I thought I'd make a couple more with 2 minute removal that will suit different ride outs ie: long runs and mot days and another for short blasts,

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:32 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:35 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:39 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:45 pm

With a bit of polish

At this angle it was blowing on the swingarm and needed polishing after every ride out so I had to straighten the end can out as you'll see in the next few pics.

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:47 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:54 pm

As I wasn't overly keen on this one and now just sounding like a normal sports bike with a race can as I put baffling down the full length of the straight section, I decided to make another without the can and only 160 mm of baffle so you can here the rumble of the turbo

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 7:56 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 8:01 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 8:05 pm

Lambda sensor for the wide band

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 8:10 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 8:11 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 8:13 pm

dangerousdave · Post by **dangerousdave** » Thu Nov 27, 2014 8:17 pm

Also added some clip ons and got rid of the straight street fighter bars, seems loads better throwing into bends now

Teego · Post by **Teego** » Thu Nov 27, 2014 9:03 pm

Work of art, Dave.