Complete engine gasket sets

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
banner001
Pit-lane Reporter
Pit-lane Reporter
Posts: 739
Joined: Tue Sep 25, 2012 3:50 pm
Location: Nuneaton, UK

Post by banner001 »

i only used OEM gaskets on my rebuild, but if you are looking to do it on the cheap i would strongly recommend using OEM for the head gasket at least.
Current bikes:
1989 UK FZR 1000 EXUP-R Streetfighter @48,000 miles
1993 ZXR 400 L3 UK-spec Track-bike @21,000 miles
1994 ZXR 400 L4 UK-spec Commuter @48,000 miles
1999 Malaguti Phantom F12 scooter with 70cc kit+mods @14,000 miles
Top
User avatar
Fatdog
Test Rider
Test Rider
Posts: 295
Joined: Wed Jun 12, 2013 8:44 pm
Location: East Yorkshire

Post by Fatdog »

banner001 wrote:i only used OEM gaskets on my rebuild, but if you are looking to do it on the cheap i would strongly recommend using OEM for the head gasket at least.
I would agree with banner.
When I did my top end rebuild I used Yamaha items.
At least you know your getting a quality item. :nod:
1993 YZF750R
EXUP - Knee Down
Top
Post Reply

Return to “Workshop”