One year on.

Post your pictures here: your bikes, meets you've attended, modifications you've made, x-rays you've had taken...
Post Reply
Pitbull
Lap Record Holder
Lap Record Holder
Posts: 470
Joined: Fri May 30, 2008 7:01 pm
Location: St Helens

Post by Pitbull »

Agreed bike looks great,

To me it sounds bloody gorgeous, me liking it very much,
User avatar
dieffe
Lap Record Holder
Lap Record Holder
Posts: 481
Joined: Tue Sep 14, 2010 7:48 pm
Location: Eastham Wirral about a mile from the Tap

Post by dieffe »

All done bar some engine tuning and a new rear light panel (due to the one I fitted falling off on the first ride out).

Image

Image

Image

Image

Just need to get it MOT'd and taxed now.
User avatar
Stig
Site Admin
Site Admin
Posts: 11811
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

Made a nice job of that mister :nod: :thumbsup:
AKA Bald headed b'stard
User avatar
dieffe
Lap Record Holder
Lap Record Holder
Posts: 481
Joined: Tue Sep 14, 2010 7:48 pm
Location: Eastham Wirral about a mile from the Tap

Post by dieffe »

I'm taking it to a dyno next Tuesday to try and sort the fuelling out, it's like a two stroke at the moment. It's coughing and farting up to a certain revs and then takes off like a bat out of hell.
What sort of back wheel power should it be showing? I have read around 120 at the wheel (145 crank) and was wondering if that is about right.
I'm not too bothered about outright power, I just want it to run right 'cos it's a pig to ride at the moment.
User avatar
dieffe
Lap Record Holder
Lap Record Holder
Posts: 481
Joined: Tue Sep 14, 2010 7:48 pm
Location: Eastham Wirral about a mile from the Tap

Post by dieffe »

User avatar
joeboy
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 3821
Joined: Sun Oct 07, 2007 12:06 am
Location: Warrington

Post by joeboy »

131 at the wheel is the stock figure. My fighter was 128 before tweaking the needle height one notch down which did sharpen it up as the guy said it would help after reading the dyno fueling chart.

I havnt taken it back as I am sure its bang on now and the needle height adjustment did make it much sharper.
GOVERNMENT WARNING!:
If you are having individual free thoughts please switch on your TV immediately and watch x factor, or go shopping, or buy a happy meal, free thought will lead to extremism.
User avatar
Willow
Pit Crew
Pit Crew
Posts: 115
Joined: Wed Oct 06, 2010 3:28 pm
Location: Paisley

Post by Willow »

I had mine on the dyno on Tuesday 124 at the rear wheel, he told me to check the float height and reset to 14 mm, if that did not sharpen it up to then drop the needles down a notch maybe even half a notch, but with setting the floats it does seem a lot better!
User avatar
dieffe
Lap Record Holder
Lap Record Holder
Posts: 481
Joined: Tue Sep 14, 2010 7:48 pm
Location: Eastham Wirral about a mile from the Tap

Post by dieffe »

Cheers for that, can't wait to see what he says.

Meanwhile here's a vid.

http://www.youtube.com/watch?v=4u_PfDb3_2s
User avatar
mobil1
Considerably Faster than Yeow!
Considerably Faster than Yeow!
Posts: 580
Joined: Thu Apr 29, 2010 9:18 pm
Location: Berkshire

Post by mobil1 »

dieffe, I might of done a bad thing, Practical Sports Bike are after mod'd FZ and FZR's, I put you and fang forward. Excommunicate me if you must but I think you both deserve something after all the hard work.
Play Safe! Play Hard!!
User avatar
creedxup
Parts department
Parts department
Posts: 2580
Joined: Fri Oct 14, 2005 11:51 am
Location: hastings sussex

Post by creedxup »

dieffe wrote:Cheers for that, can't wait to see what he says.

Meanwhile here's a vid.

http://www.youtube.com/watch?v=4u_PfDb3_2s
That's lovely and shiny, the exhaust's turned a nice shade of gold as well.

You've routed the choke cable in a very strange way, does it still operate correctly ?
1992 RU midnight blue, Wiseco 1070, 6 speed, r1 calipers, ducati discs , 157 bhp crank, Ohlins shock
joe111
Lap Record Holder
Lap Record Holder
Posts: 445
Joined: Wed Aug 17, 2011 10:44 am

Post by joe111 »

is it dyno day today, not the best day to run in this heat im interested to see results.

ill guess first with that zorst i reckon it made about 115bhp?
and its running to lean?
you cant polish a turd, but you can buy some shiny shit
joe111
Lap Record Holder
Lap Record Holder
Posts: 445
Joined: Wed Aug 17, 2011 10:44 am

Post by joe111 »

oh and i like the switch gear cleans the bars up nice
you cant polish a turd, but you can buy some shiny shit
User avatar
dieffe
Lap Record Holder
Lap Record Holder
Posts: 481
Joined: Tue Sep 14, 2010 7:48 pm
Location: Eastham Wirral about a mile from the Tap

Post by dieffe »

mobil1 wrote:dieffe, I might of done a bad thing, Practical Sports Bike are after mod'd FZ and FZR's, I put you and fang forward. Excommunicate me if you must but I think you both deserve something after all the hard work.
That's not a bad thing at all, I'm made up.
It would be nice to have it in a magazine, cheers :thumbsup:
User avatar
dieffe
Lap Record Holder
Lap Record Holder
Posts: 481
Joined: Tue Sep 14, 2010 7:48 pm
Location: Eastham Wirral about a mile from the Tap

Post by dieffe »

joe111 wrote:oh and i like the switch gear cleans the bars up nice
Cheers Joe.
User avatar
mobil1
Considerably Faster than Yeow!
Considerably Faster than Yeow!
Posts: 580
Joined: Thu Apr 29, 2010 9:18 pm
Location: Berkshire

Post by mobil1 »

Finger crossed then mate. :thumbsup:
Play Safe! Play Hard!!
Post Reply