Exup 1000

Hi Matt, Chrysler is long gone now, only Mopar remains. The race and Top Fuel Hemi`s are still today world record holders.
I can vouch for the rtv, it fitted gasketless to my 4.0lt diff cover, that should of had a gasket, my mate was service manager for Chrysler and they had stopped stocking the ...

Hello Matt, If your rtv didn`t cure overnight, I would suspect it first, cos its cheap and fairly easy to use a different brand, depending on how clean you can get the now old gasket.
You are so lucky being in USA, all the good automotive stuff is available.
I got a tip from a UK Chrysler Mopar ...

Not had this issue but I feel your pain

Do you let the rtv sealant holding in the crescent set before starting up the motor?

Being as the rtv is a silicone it's also like a lube when wet which may allow any pressure to influence where the crescent goes

I thought I left it long enough but may be ...

Team,

So I'm looking for some help/advice on why I cannot seem to replace the valve cover/rocker cover gasket without it leaking? I'm not a newbie, I'm a meticulous wrench and have worked on bikes for 30+ yrs... but this is driving me nuts.

The issue is that when the rubber gasket is installed ...

Cheers for the advice fellas. You confirmed where my head was.

I pulled the EX cam and decided to see what shims where installed. I had a mix of 165s and 170s. So I swapped things about abit and replaced the valves with 170s installed with the 165s.

I just ordered four (4) 160s that will replace ...

Hello Chaps,

First post, so here goes. I'm here in the USA and I'm restoring a 1990 well neglected EXUP. That said, it's time to check/adjust the valves.

Before the tear down the bike ran fine. I've removed the plugs and they look "perfect". I checked the valves just for sanity sake while the ...