Exup 1000

Unfortunately Dangerousdave doesn't do them any more.

Big shame!

Thanks stig,

My current parts are still ok at the moment but I have changed them in the past due to corrosion, so anticpate that they will need changing again at some time in the future. I like the idea of stainless, so thought I'd get them while I could.

I'll send him a PM.

Thanks again for your ...

I'm really sorry to ask this because I'm sure it keeps getting asked (but I still can't find it in a search).......

What's the name/contact of the gent who makes/sells the stainless steel valve pulley wheels and cable brackets plse?

Thanks for your help,

George

Where there's a sleeved needle bearing in the suspension knuckle which goes all the way through, it's pointless putting a grease nipple in place as the grease won't have anywhere to go. But where there's a space between 2 needle bearings you can put a grease nipple there as it'll force its way ...

Stig wrote:To get the pics to show paste the

Code: Select all

IMG

code into your post then click preview before submit

I thought that's what I did. I'll have another go later.
Thanks for your help

Thanks Stig,
The bike's already in bits and I will be replacing all bearings in the rear suspension, which is when I'm thinking of fitting the nips. I've got some M6 nipples and the thread tap. I want to make greasing a regular maintenance event so thought using a grease gun would be easier.
My ...

Hi,
Has anyone fitted grease nipples to their link arm thingy?
I'm thinking of putting one on each bearing (3 total) and maybe 1 on the top shock connection.
If someone's done this b4 and can give advice or a picture on the best positions etc, I would be very grateful.
While I'm at it, what about ...

B4 you ask, it did come with frame/wheels etc

Currrent state!



This is a practice piccie post. I'm not holding my breath!!

I've attached the photo for you Dave (moderator)

Like stig says copy the IMG code and paste in on your post, simples

Thanks Stig.
not at home till next week. I'll give it a try then

Hi to all.
Stumbled on this forum whilst researching bits for my rebuild. You look like a great source of info and help and I look forward to bleeding ya knowledge dry :D
I've owned a '91 RU since it was 1yr old (it replaced an '89 I had nicked....f'in scumbags!). It's not turned a wheel for 13yrs ...