Roadhogs baby Exup

Roadhog · Post by **Roadhog** » Wed Dec 27, 2006 12:02 pm

Just picked this up before xmas,got it quite cheap too,FZR400 Exup,needs about a weekend of tlc and a set of head bearings and thats about it,not quite sure what i am gonna do with it yet,i have been after a cheap track bike but was looking for a 600,will see how it rides when its finished,i mite just sell it on..............

Ade

Post by **Stig** » Wed Dec 27, 2006 1:24 pm

Its just begging for a 1040 lump

WAKWAK · Post by **WAKWAK** » Wed Dec 27, 2006 1:30 pm

oooo that would be quick

1040EXUP · Post by **1040EXUP** » Wed Dec 27, 2006 1:31 pm

great track bike fun, just keep it nailed thru the corners!!! me Im thinking of off-road riding this year

or draggin

Roadhog · Post by **Roadhog** » Wed Dec 27, 2006 3:40 pm

Stig wrote:Its just begging for a 1040 lump

Well apparantly the 600 lumps are a straight swap,so that might haul my fat ass round a track abit quicker lol

Ade

Roadhog · Post by **Roadhog** » Wed Dec 27, 2006 4:28 pm

One more pic,just tried a carbon can on it lol

Ade

Thunderacemalc · Post by **Thunderacemalc** » Wed Dec 27, 2006 9:00 pm

nice likkle workshop you got there

Roadhog · Post by **Roadhog** » Wed Dec 27, 2006 10:26 pm

Thunderacemalc wrote:nice likkle workshop you got there

Cro i wish lol,thats the garage where i work,they are really good and let me keep a couple of bikes there while i tinker with em in me own time

Ade

Roadhog · Post by **Roadhog** » Wed Jan 24, 2007 7:36 pm

Ok,i have had a thought,i am now thinking about going for a YZF750 lump in this little baby,

should make it a fun little bike i reckon,not in any hurry so will take me time,got the gixxer to finish first aswell lol

Ade

Roadhog · Post by **Roadhog** » Fri Mar 16, 2007 8:45 pm

Well,the body is starting to come together,i have accquired most of the bits i need,the front end is only cable tied on at the mo,will fit it properly when i have the 750 engine in it,think it should look quite good when its eventually finished......

Ade

Post by **Stig** » Fri Mar 16, 2007 9:17 pm

well done Ade,

personally.....just me being picky

INHO of course....
I recon the tail section looks too long...overhangs too far and spoils the balance.....nowt wrong with the concept

then again, it might look totally different when the tank and seat are in situ...giving a little more height

i'll crawl back into me skip now

Roadhog · Post by **Roadhog** » Fri Mar 16, 2007 9:24 pm

Stig wrote:well done Ade,

personally.....just me being picky

INHO of course....
I recon the tail section looks too long...overhangs too far and spoils the balance.....nowt wrong with the concept

then again, it might look totally different when the tank and seat are in situ...giving a little more height

i'll crawl back into me skip now

Any input is always welcome,its all work in progress at the mo tho,i have a YZF750 rear swingarm to fit to it yet,so will see how it sits then,but i know what you mean,i have thought that meself,will see how it looks when i got the swingarm in place and do the final fettling then

Ade

Roadhog · Post by **Roadhog** » Fri Mar 16, 2007 9:29 pm

Needs tidying up and maybe polishing,but this is what i wanna fit to the rear......

Ade

dave 59 · Post by **dave 59** » Fri Mar 16, 2007 10:09 pm

must agree tail end needs shortening a bit

Rutz · Post by **Rutz** » Fri Mar 16, 2007 10:25 pm

Hang on....what we building here mr frankenstien

fzr400 rolliing chassis
750cc engine ?
Yzf swingarm
R1 bodywork

WHY?