Replacement carb parts.

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
User avatar
nuggitt
Moderator
Moderator
Posts: 5967
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nuggitt »

Here's the link for the carb seals.....

https://litetek.co/Carb_Kit_Yamaha_FZR1000_89-95.html
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
User avatar
nuggitt
Moderator
Moderator
Posts: 5967
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nuggitt »

Goshreally2 wrote: Nuggit has mentioned that someone he knows has had problems with it - I don't know what the nature of theses problems were maybe he could elaborate.
The friend of mine had nothing but trouble after he fitted the carb kit from Yambits.

He did say it wasn't running right and bogging down when you opened the throttle. He's a very good mechanic and knows his stuff. After a few attempts of stripping the carbs down and checking everything over, and it was the same. He got peed off with them in the end and rang Yambits up to tell them he was sending them back to them.

Unless he got a bad set and was unlucky with them, who knows. :(
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
Post Reply

Return to “Workshop”