exup coils

roystadoyster101 · Post by **roystadoyster101** » Tue Jun 19, 2018 3:08 pm

Hi all,
am building one up which was missing some parts, how do the coils mount on the heat shroud ?
Ie coil 1 & 4 does it go on the left or right ?

Also, does any one have for sale the little wires that attach to the coils via spade connectors with a 2 pin block connector on them please.

Also, need the curved fuel pump bracket (got pump) and bolts, need the resistor for the fuel pump inc bolts and need a reg/rec.

might be able to get it running soon !!!!

many thanks

jas328sport · Post by **jas328sport** » Tue Jun 19, 2018 3:19 pm

Coil 1+4 are bolted on the left hand side.

roystadoyster101 · Post by **roystadoyster101** » Tue Jun 19, 2018 3:48 pm

cheers bud, i guess the leads go to the left and under the shroud ???
due to the length of lead no 1.

many thanks
roy

roystadoyster101 · Post by **roystadoyster101** » Wed Jun 20, 2018 5:30 pm

I have another question....

do the coils earth through the 2 mount bolts ? or do the coils earth through the little + & - terminals ?

i'm trying to build one up and bought a coil mount/heat shroud but the mount holes don't line up-was thinking to get one bolt in and lockwire/cable tie the other hole that doesn't quite line up.

also can anyone help with routing of the HT leads ?

many thanks

jas328sport · Post by **jas328sport** » Wed Jun 20, 2018 5:51 pm

Luckily I have my carbs off at the moment so I have took some pics of how mine are set up.

roystadoyster101 · Post by **roystadoyster101** » Wed Jun 20, 2018 6:34 pm

awesome thanks mate

any ideas on the earthing/coil mounting?

jas328sport · Post by **jas328sport** » Wed Jun 20, 2018 10:02 pm

No sorry I am not sure how they are earthed as all I have are the 2 wires coming out of the coil that go into the block connector.