A couple of questions.

Start a discussion about anything you like here. Newbies please note, it's your round!
Post Reply
User avatar
yzf750Jim
Brolly Dolly
Brolly Dolly
Posts: 19
Joined: Fri Mar 07, 2014 6:57 pm

A couple of questions.

Post by yzf750Jim »

I would like to know if swapping my standard exhaust on my 1993 YZF 750 will effect the way my exup valve works.

Also I am finding my front brakes scar the life out of me when I grab them....I have read on the net that you can soften them off by only filling the front do bottle with half the amount of fluid....

Any help please......
User avatar
nuggitt
Moderator
Moderator
Posts: 5967
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nuggitt »

I have a micron race pipe fitted to my bike with no problems at all.

As for the front brake question. I'm not sure what you mean when you say the front do bottle?? Do you mean the brake reservoir? If so, you need to have the level of brake fluid showing in the sight glass. I've never heard of only filling it up half way. That could cause you real problems with letting air into the system then you'llbe buggered when it come to braking. :eek:
Last edited by nuggitt on Sat Mar 08, 2014 9:52 pm, edited 1 time in total.
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
User avatar
Stig
Site Admin
Site Admin
Posts: 11786
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

you could file a leading egde to the pads, it'll help to stop it snatching
AKA Bald headed b'stard
User avatar
yzf750Jim
Brolly Dolly
Brolly Dolly
Posts: 19
Joined: Fri Mar 07, 2014 6:57 pm

Post by yzf750Jim »

Sorry meant to say front fluid bottle :retard: :retard:...just blame the predictive text on my kindle.....:lol:

Cheers stig will get them out this week and give it a go.....I need to get my front forks rebuilt as I have been having low speed front wheel wobbles and have read that the most likely cause is the front forks.....seems like the ideal time to do them...

My rear shock has just been rebuilt.....it's took nearly 3 weeks...apparently with my bike been a 1993 the shock is obsolete so the bloke at Carl ward's has had to order a Bush from Holland.

I just hope it's not a wacky backyard Bush. :unibrow: :unibrow:
User avatar
Stig
Site Admin
Site Admin
Posts: 11786
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

low speed wobbles could be a few things...

head race faulty either worn or loose
low tyre pressures front OR rear tyres
swing arm bushes causing the tail to wag the dog
front wheel bearings
AKA Bald headed b'stard
User avatar
yzf750Jim
Brolly Dolly
Brolly Dolly
Posts: 19
Joined: Fri Mar 07, 2014 6:57 pm

Post by yzf750Jim »

The other pressures are ok.....

Can you tell me how to check the head race...

Could it be the tyres?????

I have a miss match...Michelin on the back Perrile on the front...
Post Reply