R1 Blue spot caliper seals

YAMAEXUP · Post by **YAMAEXUP** » Wed Feb 19, 2014 9:57 pm

I recollect that someone found that the seals for the blue/gold/silver pucks arn't available on the parts list for the R1, but has been found on a parts list for the XJR1300 or something similar.

Can anybody verify which bike & possibley the part number??

Post by **Stig** » Wed Feb 19, 2014 10:01 pm

its not the piston seals thats unavailable but the seals that fit to the blanking plugs....they're on the XJR1300 parts diagram but not the R1 diagrams

YAMAEXUP · Post by **YAMAEXUP** » Wed Feb 19, 2014 10:35 pm

Those are the seals that I meant...the ones for the coloured pucks.

Have you got a parts fiche link?

Post by **Stig** » Thu Feb 20, 2014 12:16 am

Had a look for the seals but seems they've been removed from the parts lists. I remember checking to confirm they were available at the time the brakes article was written. Just a shame I didnt write down the parts number or better still order a spare set of seals from Yamaha. i would then have had the parts code AND the sizes of the new seals

I can measure the size of the seal in the rear caliper spot that i have already stripped if that will help

http://www.exup1000.co.uk/tech_info_area/stripped.htm

willandrip · Post by **willandrip** » Thu Feb 20, 2014 4:24 am

Items 7 & 8.

http://www.bikerstoolbox.co.uk/acatalog ... ml#aBTB002

YAMAEXUP · Post by **YAMAEXUP** » Thu Feb 20, 2014 11:15 am

Thanks for that info. Very useful