My 1st project. .

odbguy · Post by **odbguy** » Wed Oct 05, 2016 6:07 pm

Hey all .. I'm going to be buying new bearings for this ..

Can someone educate me please on what bearings are for where? I got the names from banners thread and can guess where the dogbone bearings go but which ones are for the spherical bearing and needle roller bearing.

Cheers

Post by **Stig** » Wed Oct 05, 2016 7:39 pm

I stand corrected but I believe the sperical bearing is for the bottom of the shock area

This one is the equivilant from info supplied on the forum many moons back

http://www.splatshop.co.uk/shock-bearin ... e12pw.html

odbguy · Post by **odbguy** » Wed Oct 05, 2016 8:42 pm

I been trying to make sense of it on ..
http://www.cmsnl.com/yamaha-fzr1000-198 ... ml#results

However when I check the part numbers the spherical bearing and needle roller bearing they come up as the same ?? http://www.ebay.co.uk/itm/252378523951 .. however using eBay for this check is probably where I'm going wrong ...

Post by **nuggitt** » Wed Oct 05, 2016 10:03 pm

You can get the roller bearings numbered as 15 on the CSM site from these guys. Cheaper than ebay.

http://shop.marksman-ind.com/bhkm1730ju ... 3012-p.asp

Stigs spot on with where the spherical bearing goes.

odbguy · Post by **odbguy** » Thu Oct 06, 2016 5:31 pm

Right ... I'm sorry ... but I'm a bit lost with CSM and what bearing is what after using banners thread as my reference for what bearings I need? ?
Is this anyway near right ?? I don't want to buy them and have the wrong ones..

odbguy · Post by **odbguy** » Thu Oct 06, 2016 5:31 pm

If that's right what's the other bearing please ??

Post by **Stig** » Thu Oct 06, 2016 6:55 pm

One end of the dog bone is fitted to a bearing on the swing arm. The other bearing you're referring to don't fit there, it fits in the other end of the rocker arm where it bolts to the rear of the frame

Post by **nuggitt** » Thu Oct 06, 2016 7:25 pm

Hello odbguy.

I borrowed your photo to try and put together where the bearings go. I've double checked what I've put and it's right. (I think so anyway)

In the post I wrote re the bearings I said bearings 15 also go in the swingarm. Sorry but I got that bit wrong. You need 2 bearings #3 for the swingarm. Sorry about that.

odbguy · Post by **odbguy** » Thu Oct 06, 2016 10:40 pm

Excellent thank you very much !! Lol
I just couldn't figure it out !! Haha

Post by **nuggitt** » Thu Oct 06, 2016 11:34 pm

It took me a while too.