Project number 3!

rf9rider · Post by **rf9rider** » Fri May 23, 2008 3:22 pm

The panels have been left a week to harden, so now flatted back and decals on, ready for some laquer.
Wish me luck this time Chaps, i`m going in........................

BIG thanks to Stig for the decals.

FZR..AL · Post by **FZR..AL** » Fri May 23, 2008 4:46 pm

Good luck Mark...i hope they turn out great

Al

Yoda · Post by **Yoda** » Fri May 23, 2008 8:06 pm

Looking good Mark.

Fingers crossed for ya.

rf9rider · Post by **rf9rider** » Fri May 23, 2008 9:05 pm

Thanks all.

Tank is finished, laquered 2 weeks ago, now flatted and polished, and fitted to the bike.
Hasn`t come out brilliant, but will do for now.

rf9rider · Post by **rf9rider** » Fri May 23, 2008 9:07 pm

Top fairing and mudguard laquered. (Fingers crossed)

rf9rider · Post by **rf9rider** » Fri May 23, 2008 9:09 pm

And finally for today, decals applied to the right front panel.

Couldn`t wait until its finished, i fitted it up to see what it looks like.

Post by **Stig** » Fri May 23, 2008 9:31 pm

looking good Mark

I recon the rear section decals are doable too

If you want me to give them a go, give us a shout and some dimensons.
I'll need the agle of the slant on the red sections too

itsnotagenesis · Post by **itsnotagenesis** » Fri May 23, 2008 9:55 pm

That looks like it will be smart

rf9rider · Post by **rf9rider** » Fri May 23, 2008 10:49 pm

Stig wrote:looking good Mark

I recon the rear section decals are doable too

If you want me to give them a go, give us a shout and some dimensons.
I'll need the agle of the slant on the red sections too

Havent` quite decided what to do with rear panels yet.

Might leave them just white, i`ll see when i`ve repaired and sprayed them.

If not, you`ll be the first to know.

rf9rider · Post by **rf9rider** » Sun May 25, 2008 1:05 am

Coming along nicely.
Mudguard, top fairing and right panel finished, i haven`t flatted the laquer back on these, just going to leave them well alone, the finish is sort of "speckled" and shiny.
Next on the list is to do another repair on the bellypan and spray that.
I have a knackered old left front panel that i might have to repair as i`m having no luck in sourcing a decent one.

fang · Post by **fang** » Tue May 27, 2008 4:26 pm

I'm sorry, but I fail to believe this is the same bike

Looking good mate, coming along nicely,

Keep up the good work, and I know where to send my panels if I ever get to the stage of paint!!

rf9rider · Post by **rf9rider** » Wed May 28, 2008 2:54 am

fang wrote: I'm sorry, but I fail to believe this is the same bike

Looking good mate, coming along nicely,

Keep up the good work, and I know where to send my panels if I ever get to the stage of paint!!

Thanks mate, i`m sure i could recommend SOMEONE ELSE to do your paintwork

rf9rider · Post by **rf9rider** » Thu May 29, 2008 5:42 am

Got some bolts and cup washers for the mudguard from bsr-aerotek, quality stuff.

rf9rider · Post by **rf9rider** » Thu May 29, 2008 5:45 am

Started work on the left front panel, been putting this off for a while as i hoped to get a decent one, no luck so far.

This is what i had to work with.

So out with the soldering iron, just needs a little filler now...........

rf9rider · Post by **rf9rider** » Thu May 29, 2008 5:51 am

Repaired a crack in the bellypan.
Having a little trouble with this as its on a flexible bit, weld keeps breaking, might just get another one.

[/list]

Exup 1000

Project number 3!

Re: Project number 3!

Re: Project number 3!