project my1

[nasty]

well nothin, better to do with my time
project3 aka my1
got some bits
r1 08 front end
r1 06 swimger,shock,linkages
yzf 750 frame



the plan is to build a m1 rep

[ace of spades]

Some people has nothing better to do with their time than build up bikes. Its a damn shame.


Good luck

[nasty]

the swinger is now in the frame

time to cut off shock mounts as you know the shocks off set
the engine is comin, from 99R1 which i got today[well rollin, wreck ]but engine is o.k will post pic asap [it dark out] and yes all parts came from that site

[nasty]

heres the pic,s of the poorly r1
]


told yait was sick
still got some bits to sell

[ace of spades]

Ouch, good luck

[fzted]

while its in bits polish everything

[nasty]

why is rossi,s m1 polished then
because thats wot i,m tryin, to build
found a site that makes bodywork too
www.lacomoto.com [lickable]
still lookin in u.k as i seen a r1 at show but can,t rember name of the stand DOH" !

[GP Motorsports]

We have been passed your thread from Lacomoto, we are GP Motorsports a manufacturer and distributor of Replica Moto GP bodykits. We built the Fait M1 replica you saw at the NEC, you can view our website at
http://www.gp-motorsports.com:80/ , we have posted extensive details about our Fiat bike on the R1 Forum.

If you need any further assistance please do not hesitate to email or call

Kind regards.

Mark Murphy
President
GP Motorsports
07967 610335
info@gp-motorsports.com

[nasty]

my 1 update
the frames been attacked and the engine fits inside the frame so its waitn, for new mounts to made [top rear and sides][keep doin,maybe tomrrow jack] then do something else
swinger arm as as had spacers made for shock linkages and plates cut for new top mount to be welded on and now uses the 06 r1] tie bar[dogbone thingy
yzf 750 stem as been welded then turned to size to fit 08 [r1] bottom yolk
had top hat spacer made to fit later top yolk[not sure with one i,m use,in just yet] yzf 750/ 06 r1 /08 r1 as i have all 3
things i,ve spent on [on that site]
harris fairing bkt
olhins damper and fittin, kit [early zx9 [same damper as most r1,s as its sd121 but cheaper [do ya home work when lookin;]save loads
07 r1 wheels compete[to stop it gettin, dragged around

[Stig]

need LOADS of pics of all these adaptations for future reference for other wanting to do something similar

..off you go,,, carry on

[rf9rider]

Be interesting to see more about the R6 swingarm swap.

[mitch]

best of luck with it all "plenty of pictures please"

[Yoda]

Sorry to hear about you having no job Nasty. But good luck with the bike. When I lost my job 2 years ago, I worked the agencies till summat permanent came along. Then I just did as much overtime as I could to get things straight again. I hope everything works out ok for you.

[tattoo]

need LOADS of pics of all these adaptations for future reference for other wanting to do something similar

..off you go,,, carry on

second that am very interested in this

[nasty]

wll its been long time some,s some up dates and pic,s





most of the frame mods have now been done with some final welding to be done on frame ,shock mount ,engine mounts as mounts are only bolted on for tests and fit as you can see its a touch high at the back as tie rod being modded as r1 to long so it,s on yzf dog bones at this time
the engine fits [r1] in new front mounts are made too ! plates made to fit r1 rearsets
more pic,s soon