Project number 3!

rf9rider · Post by **rf9rider** » Sun Jan 20, 2008 10:58 am

Cheers Yoda, might have to sell the bodykit to raise some money to buy all this extra stuff

Yoda · Post by **Yoda** » Sun Jan 20, 2008 3:48 pm

rf9rider wrote:Cheers Yoda, might have to sell the bodykit to raise some money to buy all this extra stuff

Buy a bit at a time. I try and buy little bits each month and have a blow out every 6 months or so. Depends on how much cash I've got to spend. Not spending much these days, as my bikes finished.

hellraiser · Post by **hellraiser** » Tue Jan 22, 2008 12:19 am

Looks good with the yzf swinger

Rwu forks aswell, ours could look similar.
If ya fighter it

Bodykit's on ebay then?
When youve built yours, wanna help me? Bet i'll finish last

Interested in the non exup running, as mine aint gonna have it either

hellraiser · Post by **hellraiser** » Tue Jan 22, 2008 12:28 am

hellraiser wrote:Interested in the non exup running, as mine aint gonna have it either

Just read one of Exupfreak's posts in workshop, seems ace's run better without the exup

I already know i could be in for some fun de-exupping (that a word!?)
a 750

rf9rider · Post by **rf9rider** » Thu Feb 07, 2008 4:42 am

Not much to report lately.
I`ve sold the OW01 bodykit, it was wide enough to fit, but had issues with the steering, couldn`t get the bars to turn, so its back to the drawing board.

Had a clear out in the garage and shed, sold/selling some YZF750 bits, made a few purchases, just awaiting delivery from the USA.

Rutz · Post by **Rutz** » Thu Feb 07, 2008 5:00 pm

rf9rider wrote:Not much to report lately.
I`ve sold the OW01 bodykit, it was wide enough to fit, but had issues with the steering, couldn`t get the bars to turn, so its back to the drawing board.

Had a clear out in the garage and shed, sold/selling some YZF750 bits, made a few purchases, just awaiting delivery from the USA.

Thought you might,had one fitted to my 89 exup racebike needed a lot of modification

cutting and re-fibreglassing

rf9rider · Post by **rf9rider** » Fri Feb 08, 2008 1:42 am

Rutz wrote:
rf9rider wrote:Not much to report lately.
I`ve sold the OW01 bodykit, it was wide enough to fit, but had issues with the steering, couldn`t get the bars to turn, so its back to the drawing board.

Had a clear out in the garage and shed, sold/selling some YZF750 bits, made a few purchases, just awaiting delivery from the USA.
Thought you might,had one fitted to my 89 exup racebike needed a lot of modification cutting and re-fibreglassing

Thought about cutting this one up to make it fit, just seemed a shame to ruin a perfectly good fairing.
Might fit standard one for this year, if i keep it then i`ll have a rethink.

rf9rider · Post by **rf9rider** » Fri Feb 15, 2008 2:19 am

Still not much more to report, R1 master cylinder arrived and fitted, just waiting on the calipers from the US of A.

Repaired a crack in the front mudguard, bit of primer filler and rubbing down to do later today.

My new clocks arrived, just have to try and straighten the top fairing mount to fit them.

Still trying to find a reasonably priced radiator, though going to take my old one today to see if its repairable.

And lastly, trying to convince Mrs RF9 that i need those 4-2-1 stainless headers.

One last job today, get the suitcases out of the loft ready for next Saturday

Rutz · Post by **Rutz** » Fri Feb 15, 2008 5:41 pm

rf9rider wrote:Still not much more to report, R1 master cylinder arrived and fitted, just waiting on the calipers from the US of A.

Repaired a crack in the front mudguard, bit of primer filler and rubbing down to do later today.

My new clocks arrived, just have to try and straighten the top fairing mount to fit them.

Still trying to find a reasonably priced radiator, though going to take my old one today to see if its repairable.

And lastly, trying to convince Mrs RF9 that i need those 4-2-1 stainless headers.

One last job today, get the suitcases out of the loft ready for next Saturday

Do you want me to come and pack your lasses suitcase again

Yoda · Post by **Yoda** » Fri Feb 15, 2008 5:52 pm

Stop shouting.

Rutz · Post by **Rutz** » Fri Feb 15, 2008 5:56 pm

If I don't...they'll ignore me

rf9rider · Post by **rf9rider** » Fri Feb 15, 2008 7:24 pm

Do you want me to come and pack your lasses suitcase again big grin

I forgot that.............

nismo · Post by **nismo** » Fri Feb 15, 2008 8:53 pm

Yoda wrote:Stop shouting.

Batteries must have run out on his hearing aid

Rutz · Post by **Rutz** » Fri Feb 15, 2008 11:44 pm

nismo wrote:
Yoda wrote:Stop shouting.
Batteries must have run out on his hearing aid

rf9rider · Post by **rf9rider** » Wed Mar 19, 2008 5:41 am

Well Chaps, been out in the garage this morning and got a bit more done.
Stainless 4-2-1 headers arrived and fitted, no more Exup valve to mess around with!