Project number 3!

Post your pictures here: your bikes, meets you've attended, modifications you've made, x-rays you've had taken...
Post Reply
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Cheers Yoda, might have to sell the bodykit to raise some money to buy all this extra stuff :crybaby:
Rutz is my friend.
User avatar
Yoda
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 7272
Joined: Sat Jan 14, 2006 7:37 pm
Location: Nail the fekker lad, dunna be frightened

Post by Yoda »

rf9rider wrote:Cheers Yoda, might have to sell the bodykit to raise some money to buy all this extra stuff :crybaby:
Buy a bit at a time. I try and buy little bits each month and have a blow out every 6 months or so. Depends on how much cash I've got to spend. Not spending much these days, as my bikes finished. :unibrow:
User avatar
hellraiser
Test Rider
Test Rider
Posts: 280
Joined: Wed Apr 18, 2007 12:34 am
Location: W'boro ~ Northants
Contact:

Post by hellraiser »

Looks good with the yzf swinger :unibrow:
Rwu forks aswell, ours could look similar.
If ya fighter it :evil:
Bodykit's on ebay then?
When youve built yours, wanna help me? Bet i'll finish last :unibrow: :retard:

Interested in the non exup running, as mine aint gonna have it either :paranoid:
:D B*st*rds the name!....................But you can call me, right bleedin! :D
User avatar
hellraiser
Test Rider
Test Rider
Posts: 280
Joined: Wed Apr 18, 2007 12:34 am
Location: W'boro ~ Northants
Contact:

Post by hellraiser »

hellraiser wrote:Interested in the non exup running, as mine aint gonna have it either :paranoid:
Just read one of Exupfreak's posts in workshop, seems ace's run better without the exup :eek:

I already know i could be in for some fun de-exupping (that a word!?)
a 750 :crybaby:
:D B*st*rds the name!....................But you can call me, right bleedin! :D
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Not much to report lately.
I`ve sold the OW01 bodykit, it was wide enough to fit, but had issues with the steering, couldn`t get the bars to turn, so its back to the drawing board. :crybaby:

Had a clear out in the garage and shed, sold/selling some YZF750 bits, made a few purchases, just awaiting delivery from the USA. :ninja:
Rutz is my friend.
User avatar
Rutz
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 5239
Joined: Mon May 22, 2006 10:54 pm
Location: ...in hiding now

Post by Rutz »

rf9rider wrote:Not much to report lately.
I`ve sold the OW01 bodykit, it was wide enough to fit, but had issues with the steering, couldn`t get the bars to turn, so its back to the drawing board. :crybaby:

Had a clear out in the garage and shed, sold/selling some YZF750 bits, made a few purchases, just awaiting delivery from the USA. :ninja:
Thought you might,had one fitted to my 89 exup racebike needed a lot of modification :nod: cutting and re-fibreglassing
The EXUP stickered zimmer frame is mine and I aint got no friends
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Rutz wrote:
rf9rider wrote:Not much to report lately.
I`ve sold the OW01 bodykit, it was wide enough to fit, but had issues with the steering, couldn`t get the bars to turn, so its back to the drawing board. :crybaby:

Had a clear out in the garage and shed, sold/selling some YZF750 bits, made a few purchases, just awaiting delivery from the USA. :ninja:
Thought you might,had one fitted to my 89 exup racebike needed a lot of modification :nod: cutting and re-fibreglassing
Thought about cutting this one up to make it fit, just seemed a shame to ruin a perfectly good fairing.
Might fit standard one for this year, if i keep it then i`ll have a rethink. :nod:
Rutz is my friend.
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Still not much more to report, R1 master cylinder arrived and fitted, just waiting on the calipers from the US of A.

Repaired a crack in the front mudguard, bit of primer filler and rubbing down to do later today.

My new clocks arrived, just have to try and straighten the top fairing mount to fit them.

Still trying to find a reasonably priced radiator, though going to take my old one today to see if its repairable.

And lastly, trying to convince Mrs RF9 that i need those 4-2-1 stainless headers. :nod:

One last job today, get the suitcases out of the loft ready for next Saturday :ninja:
Rutz is my friend.
User avatar
Rutz
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 5239
Joined: Mon May 22, 2006 10:54 pm
Location: ...in hiding now

Post by Rutz »

rf9rider wrote:Still not much more to report, R1 master cylinder arrived and fitted, just waiting on the calipers from the US of A.

Repaired a crack in the front mudguard, bit of primer filler and rubbing down to do later today.

My new clocks arrived, just have to try and straighten the top fairing mount to fit them.

Still trying to find a reasonably priced radiator, though going to take my old one today to see if its repairable.

And lastly, trying to convince Mrs RF9 that i need those 4-2-1 stainless headers. :nod:

One last job today, get the suitcases out of the loft ready for next Saturday :ninja:


Do you want me to come and pack your lasses suitcase again :D
The EXUP stickered zimmer frame is mine and I aint got no friends
User avatar
Yoda
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 7272
Joined: Sat Jan 14, 2006 7:37 pm
Location: Nail the fekker lad, dunna be frightened

Post by Yoda »

Stop shouting. :lol: :lol: :lol: :lol:
User avatar
Rutz
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 5239
Joined: Mon May 22, 2006 10:54 pm
Location: ...in hiding now

Post by Rutz »

If I don't...they'll ignore me :D
The EXUP stickered zimmer frame is mine and I aint got no friends
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Do you want me to come and pack your lasses suitcase again big grin
I forgot that............. :lol: :lol: :lol:
Rutz is my friend.
User avatar
nismo
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 4653
Joined: Wed Feb 01, 2006 7:57 pm
Location: M6 normally

Post by nismo »

Yoda wrote:Stop shouting. :lol: :lol: :lol: :lol:
Batteries must have run out on his hearing aid :p :D :lol: :lol: :lol: :lol:
Defected for that V Twin goodness
User avatar
Rutz
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 5239
Joined: Mon May 22, 2006 10:54 pm
Location: ...in hiding now

Post by Rutz »

nismo wrote:
Yoda wrote:Stop shouting. :lol: :lol: :lol: :lol:
Batteries must have run out on his hearing aid :p :D :lol: :lol: :lol: :lol:

:p :p :p
The EXUP stickered zimmer frame is mine and I aint got no friends
User avatar
rf9rider
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2764
Joined: Wed Nov 02, 2005 4:44 am
Location: Santa Maria De Nieva, Andalucia

Post by rf9rider »

Well Chaps, been out in the garage this morning and got a bit more done.
Stainless 4-2-1 headers arrived and fitted, no more Exup valve to mess around with!

Image

Image
Rutz is my friend.
Post Reply