BarflysR1

barfly · Post by **barfly** » Wed Apr 04, 2007 10:14 pm

Finally got around to doing something to it...

...got new front end in and...

...it also started after much coaxing now to see if its still goes in a straight line once its all together

Post by **Stig** » Wed Apr 04, 2007 10:18 pm

getting there mate

whens EDC???

barfly · Post by **barfly** » Wed Apr 04, 2007 10:23 pm

End of April I hope...will probably run it around like that for the summer then finish it off in winter...now where are my mops

Rutz · Post by **Rutz** » Wed Apr 04, 2007 10:55 pm

kiwi_r1 · Post by **kiwi_r1** » Thu Apr 05, 2007 6:52 am

Summat missin from the right side handle bar ........................

fzted · Post by **fzted** » Thu Apr 05, 2007 7:26 am

whats a straight line

Yoda · Post by **Yoda** » Thu Apr 05, 2007 10:39 am

Getting there Barfly. Just gotta remember how to ride now.

kiwi_r1 · Post by **kiwi_r1** » Thu Apr 05, 2007 10:41 am

You could lend him "Spewing Boostie" to train on ................

Yoda wrote:Getting there Barfly. Just gotta remember how to ride now.

Yoda · Post by **Yoda** » Thu Apr 05, 2007 10:55 am

Its never gonna live that down is it?

Only took 200ml of distilled water to fix though.

kiwi_r1 · Post by **kiwi_r1** » Thu Apr 05, 2007 10:57 am

Nope

, But we have a prevention for next time...........blocks on the pedals for the rider, can put normal sidstand on then

Yoda wrote: Its never gonna live that down is it? Only took 200ml of distilled water to fix though.

Yoda · Post by **Yoda** » Thu Apr 05, 2007 11:06 am

Blocks on pedals?

scar_biker · Post by **scar_biker** » Thu Apr 05, 2007 11:27 am

NICE ONE DUDE

LOOKS LIKE IT'S GOING TO BE A NICE WEE BEASTIE WHEN IT'S FINISHED

stevierst · Post by **stevierst** » Thu Apr 05, 2007 5:38 pm

She's lookin' just fine. Nice to see someone building a proper bike, without all the girly plastic!!!!

barfly · Post by **barfly** » Thu Apr 05, 2007 7:24 pm

kiwi_r1 wrote:Summat missin from the right side handle bar ........................

No its not...put it on after I took the photos...Cheers Lads I'm thinking of keeping it the original white and spraying the red panels to match...

...and the fairing attached to the above bike is what I've decided on which means I can run the original dash

stevierst · Post by **stevierst** » Thu Apr 05, 2007 11:00 pm

It's good keeping the original clocks, you can make sure evertthing works properly then.

A word of advice, make sure your bar clamps are really tight, especially if your a "full throttle" rider (very hard to do on an R1 fighter) iv'e just stripped all the knurling off my renthals around the clamp area!!!! must be something to do with the dry weather.