Exup bikes x 2 and parts

Post by **nugget** » Fri Jul 13, 2018 5:20 pm

You may do better by putting some photos up.

BONLY1 · Post by **BONLY1** » Fri Jul 13, 2018 8:06 pm

Not far from you meself - What model / year we looking at?

Bantam · Post by **Bantam** » Sat Jul 14, 2018 8:47 am

BONLY1 wrote:Not far from you meself - What model / year we looking at?

1989/90 model exup 1000's, i've had loads over the years and these are the last 2 I have. All with V5 of course.

Bantam · Post by **Bantam** » Sat Jul 14, 2018 8:49 am

nuggitt wrote:You may do better by putting some photos up.

If the weather is good today I may get all the bits I have and photo the lot on the lawn.
Trouble is there are so many they cover two sheds and my bike garage so take a lot of getting and putting back.

matzxr · Post by **matzxr** » Sat Jul 14, 2018 2:14 pm

PM Sent

Bantam · Post by **Bantam** » Sat Jul 14, 2018 2:43 pm

Bantam · Post by **Bantam** » Sat Jul 14, 2018 2:50 pm

There are 2 rear tyres in the pictures, they are both sc1's.
The one on the wheel has been used but barely and the other has never been on anything.
I'm estimating now but I think they were bought 5 year ago and have been in the shed all that time.
The tyres on the bike are used pilots, brilliant on a wet track day but may be getting a bit old now.

Bantam · Post by **Bantam** » Sat Jul 14, 2018 3:08 pm

Oh by the way the bike in the pictures was being rebuilt for track days so has new chain and sprockets and has been flushed and serviced.
It is in mid build, which is when I struggled with the looms and haven't got back to finishing it since (2 years ago!)
Got distracted putting my FJ1200 back together instead and then set about doing an exup wheel conversion on it, which is why there aren't more wheels in the pictures.

Bantam · Post by **Bantam** » Tue Jul 24, 2018 10:49 pm

All gone now!

YAMAEXUP · Post by **YAMAEXUP** » Tue Jul 31, 2018 10:07 pm

Bantam wrote:Oh by the way the bike in the pictures was being rebuilt for track days so has new chain and sprockets and has been flushed and serviced.
It is in mid build, which is when I struggled with the looms and haven't got back to finishing it since (2 years ago!)
Got distracted putting my FJ1200 back together instead and then set about doing an exup wheel conversion on it, which is why there aren't more wheels in the pictures.

I did the Exup rear wheel conversion on my FJ1200 3XW. It took quite a bit of machining & cutting down of the cush drive rubbers, but it worked a treat & so i've got the best options for 17" tyre choice.

yzfpaul · Post by **yzfpaul** » Thu Mar 07, 2019 11:07 pm

im looking for rwb full fairing set, long shot but do you still have the bike and if yes would you part with just the tank and full bodywork ?

Post by **Stig** » Thu Mar 07, 2019 11:39 pm

There's a guy on one of the FB groups selling a top cowl and another selling panels

https://www.facebook.com/groups/6802165 ... 01?sfns=mo

Group is FZr1000 Exup classic

Post by **Stig** » Thu Mar 07, 2019 11:39 pm

Anyway, why you after parts. Come on spill the beans!

yzfpaul · Post by **yzfpaul** » Fri Mar 08, 2019 12:22 am

i have a tatty grey exup

Post by **nugget** » Fri Mar 08, 2019 8:25 am

OMG!! He's at it again.

Exup 1000

Exup bikes x 2 and parts

SOLD