strange caps on ignition switch screws

two-stroke-brit · Post by **two-stroke-brit** » Fri Apr 13, 2018 1:57 am

hi all, i wanted to swap the top yoke from a 94 to a 89.
but one has protective caps over the torx heads.
how do you get them off.
thanks mark

Post by **Stig** » Fri Apr 13, 2018 6:50 am

The yolks shouldn't be interchangeable as fork diameters are different

two-stroke-brit · Post by **two-stroke-brit** » Fri Apr 13, 2018 2:46 pm

Yes that's correct , but i want to retain the 89 ignition switch .
thanks mark

two-stroke-brit · Post by **two-stroke-brit** » Fri Apr 13, 2018 2:48 pm

my mistake in the original post,
swapping the whole front end out but would like to retain all the switch gear.
thanks mark