stupid bike or stupid me?

Justincoleman · Post by **Justincoleman** » Mon Mar 26, 2018 2:12 am

One last question. Where is the bleed nipple located? Thanks

Post by **nuggitt** » Mon Mar 26, 2018 9:53 am

Here's a photo of the nipple.

It's under the rubber cap. (Which I didn't take off) Don't get the fluid on any paintwork or that'll be another job.

Do what Bonly said and undo those 3 bolts and gently take of the casing then pull the clutch lever in a few times so it pushes the piston out.

I'll now go and find you a seal kit on ebay.

Post by **nuggitt** » Mon Mar 26, 2018 10:05 am

Here you are Justin.

Like Bonly says take plenty of photos before you start taking things off and then you know how it all goes back together.

I hope there's a cuppa in this for us when we meet up at Lincoln for the bike fest.

CLUTCH SEAL KIT

They are using a photo for the front brake seal kit so ignore that and it should look something like this...

oldskoolexup · Post by **oldskoolexup** » Mon Mar 26, 2018 10:48 am

just a small suggestion....make sure you've a clean (won't be for long so something you don't mind binning after) rag to soak up any hydraulic fluid leakage as it doesn't like painted or coated surfaces.

BONLY1 · Post by **BONLY1** » Mon Mar 26, 2018 11:02 am

Justincoleman wrote:One last question. Where is the bleed nipple located? Thanks

Have you actually got an Exup?

oldskoolexup · Post by **oldskoolexup** » Mon Mar 26, 2018 11:22 am

BONLY1 wrote:
Justincoleman wrote:One last question. Where is the bleed nipple located? Thanks
Have you actually got an Exup?

Photos please

Post by **nuggitt** » Mon Mar 26, 2018 12:04 pm

BONLY1 wrote:
Justincoleman wrote:One last question. Where is the bleed nipple located? Thanks
Have you actually got an Exup?

I bet he'd find those other nipples without any trouble.

Justincoleman · Post by **Justincoleman** » Mon Mar 26, 2018 2:26 pm

after I wrote that message I went out to the bike and found the nipple!!! Thank you I shall get the seal kit ordered and get the work. Yes definitely a cuppa in it for you lot. When is the meet as I am only in louth 25 miles away from Lincoln

Justincoleman · Post by **Justincoleman** » Mon Mar 26, 2018 2:35 pm

https://imageshack.com/my/images

Picture of my bike

Post by **nuggitt** » Mon Mar 26, 2018 2:42 pm

Justincoleman wrote:Yes definitely a cuppa in it for you lot. When is the meet as I am only in louth 25 miles away from Lincoln

June 10th which falls on a Sunday. No excuses for washing ones hair that day. Stigs excluded from that practice.

Justincoleman · Post by **Justincoleman** » Mon Mar 26, 2018 3:11 pm

Oh good, just checked my calender and I'm not washing my hair that night! I shall put that down in my diary and I shall be there.

Post by **Stig** » Mon Mar 26, 2018 5:26 pm

When you remove the old piston, there's a seal that you'll replace. It's V shaped in section. Make a note which way the open end is facing so you know which way around to fit the new one

Post by **nuggitt** » Tue Mar 27, 2018 10:48 am

Justincoleman wrote:https://imageshack.com/my/images

Picture of my bike

I've tried to have a look at your bike via imageshack but the link doesn't work for me???

I am a member and logged in but still nothing.

Graham Crayon · Post by **Graham Crayon** » Tue Mar 27, 2018 4:17 pm

Me too. Just a link to the website home page by the looks?

Justincoleman · Post by **Justincoleman** » Tue Mar 27, 2018 5:01 pm

A picture of my bike.