Paddock Stand

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
User avatar
nugget
Moderator
Moderator
Posts: 5976
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nugget »

Get yourself an abba stand. Best bit of kit I've bought. :nod:
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
User avatar
Stig
Site Admin
Site Admin
Posts: 11811
Joined: Wed Sep 28, 2005 7:54 am
Location: Searching for my bike

Post by Stig »

Or make stigs stand off main site plans
AKA Bald headed b'stard
Top
User avatar
ROB
Brolly Dolly
Brolly Dolly
Posts: 11
Joined: Fri May 12, 2017 5:02 pm
Location: NW LONDON

Post by ROB »

Hi Stig. That stand looks like the buisness and somebody did technical drawing at school I'll wager, nice one. If I had a lathe and the welding eqiupment I might take a stab but I haven't and I need the stand pronto. I like the Abba stand and simlar in operation to your own design. However there must be stands avail with the cup design and in use by other forum members....I'll wait and see if any other members can help with stand manufacturers they recommend.

Thanks for the help thus far.
Bubble up rubber down.
Top
Post Reply

Return to “Workshop”