It looks like this at the moment
well the parts are back from powder
back to this..
If anyones interested will put more pics up of renovation, I'll do a full item when the frames back together next week.
c
FZR250 3LN carb update? more FZR porn
-
Lukather
- Pit-lane Reporter
- Posts: 732
- Joined: Sat Jul 25, 2009 12:19 pm
- Location: sent to bed early
- Contact:
FZR250 3LN carb update? more FZR porn
These must be the most gunked up carbs Ive ever seen, been working on the 250 3LN - been stood 11 years... believe it or not the bike started and ran ok?
It looks like this at the moment
well the parts are back from powder
back to this..
If anyones interested will put more pics up of renovation, I'll do a full item when the frames back together next week.
c
It looks like this at the moment
well the parts are back from powder
back to this..
If anyones interested will put more pics up of renovation, I'll do a full item when the frames back together next week.
c
-
roadrunner
- Factory Rider
- Posts: 399
- Joined: Tue Feb 02, 2010 3:18 pm
- Location: Hull. East Yorkshire.
Re: FZR250 3LN carb update? more FZR porn
Ooooh yes pleaseLukather wrote:These must be the most gunked up carbs Ive ever seen, been working on the 250 3LN - been stood 11 years... believe it or not the bike started and ran ok?
If anyones interested will put more pics up of renovation, I'll do a full item when the frames back together next week.
c
With age comes wisdom.......and senility!!! Who are you again?
Always in interested in photos of peoples working on their bikes. I too can't believe the bike ran with all that crap in the carbs. 
Mine starts coughing if it gets a minute bit of crap in the carbs.
Mine starts coughing if it gets a minute bit of crap in the carbs. Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
-
Lukather
- Pit-lane Reporter
- Posts: 732
- Joined: Sat Jul 25, 2009 12:19 pm
- Location: sent to bed early
- Contact:
Well I@m back - the FZR250 saga continues
I'm going to put some images and information up on the site about the bike and current state of affairs....I'll get them together...
Needless to say after much trying the bike still isn't running correctly so i'm going to open it up to the forum and see if anyone has any help...
Needless to say after much trying the bike still isn't running correctly so i'm going to open it up to the forum and see if anyone has any help...
-
Lukather
- Pit-lane Reporter
- Posts: 732
- Joined: Sat Jul 25, 2009 12:19 pm
- Location: sent to bed early
- Contact:
HELP
well here are the images for you to peruse....
I still need help with the bike if anyones willing...it runs but John couldn't get it running right either no tickover or wouldn't rev up through range properly..... anyone ?
I still need help with the bike if anyones willing...it runs but John couldn't get it running right either no tickover or wouldn't rev up through range properly..... anyone ?
