G'day folks

Kiwi34 · Post by **Kiwi34** » Tue Nov 15, 2016 8:52 pm

Hi All.
Just about to start my winter project of trying to save my '90 1000exup. It has been sitting in an unloved state at the back of a various garages and sheds for the last 12+ years so now I have some space I thought it's best that I do something with it ...... there is lots of bits missing unfortunately (and the last thing i rebuilt was an Rd50) so please expect lots of dumb questions from me ,and lots of 'wanted' posts.
I will post some pics soon
Ta

Post by **Stig** » Tue Nov 15, 2016 9:16 pm

Welcome

There's loads of info on site including the tech section on the main site but always someone about to assist too

Good luck with the rebuild. Look forward to seeing some pictures

Jay762 · Post by **Jay762** » Wed Nov 16, 2016 11:50 am

Love a project thread - great that you will be keeping a camera handy - helps when trying to answer questions as well

Post by **nugget** » Wed Nov 16, 2016 7:49 pm

Welcome in Kiwi and there's no such thing as a dumb question, lets call it a challenge.

Fatdog · Post by **Fatdog** » Thu Nov 17, 2016 12:41 pm

Welcome in Kiwi.
RD50 - now you don't see too many of them now (and yes I'm old enough to remember them!)

roadrunner · Post by **roadrunner** » Thu Nov 17, 2016 7:05 pm

Fatdog wrote:Welcome in Kiwi.
RD50 - now you don't see too many of them now (and yes I'm old enough to remember them!)

RD50?........... I still remember the Grinlay Peerless

roadrunner · Post by **roadrunner** » Thu Nov 17, 2016 7:08 pm

roadrunner wrote:
Fatdog wrote:Welcome in Kiwi.
RD50 - now you don't see too many of them now (and yes I'm old enough to remember them!)
RD50?........... I still remember the Grinlay Peerless

That should have read Grindlay Peerless

Kiwi34 · Post by **Kiwi34** » Tue Feb 07, 2017 9:12 pm

Well got the motor out and now its on the bench,ready for some serious cleaning to happen !!!
next part of the plan is to sort the frame /swinging arm, then the front end , then the rear subframe and rear side panels etc, then more tlc on the motor and try and put it all back together..

Jay762 · Post by **Jay762** » Wed Feb 08, 2017 1:54 pm

would you consider vapour blasting (posh steam cleaning) or are you getting stuck in with Gunk and tooth brushes?

Kiwi34 · Post by **Kiwi34** » Tue Feb 14, 2017 10:55 am

Gunk and toothbrushes at the moment

Kiwi34 · Post by **Kiwi34** » Wed Feb 22, 2017 12:44 pm

Well there is not much more that I can take off this now

Guess i should start cleaning things and work how it all goes back together.

Post by **nugget** » Wed Feb 22, 2017 1:38 pm

It does help if you take plenty of photos when you take bits off as a reference. If you get stuck there's plenty of folk on here willing to help.

fzted · Post by **fzted** » Sat Feb 25, 2017 11:38 am

Mmmmi remember these days

Kiwi34 · Post by **Kiwi34** » Tue Apr 18, 2017 2:14 pm

Its beginning to look a bit bike shaped again

( this is only a temp mock up at the moment )

Jay762 · Post by **Jay762** » Fri Apr 21, 2017 6:38 am

ooooooo looking goood!