Another Quality Ebay Product!

Fatdog · Post by **Fatdog** » Fri Sep 02, 2016 1:06 pm

Wow, good luck with that one! Junk

That might be a bit harsh as the plugs might still work.

Post by **nugget** » Fri Sep 02, 2016 1:47 pm

A bit of a wire brushing and it'll be fine Dave.

Post by **Stig** » Fri Sep 02, 2016 2:01 pm

Look you lot, I advertised that head in good faith with an accurate description
I took it off my bike as it was missing on tick-over so thought I'd swap the head instead of looking to do anything else first
It's a good head but might need a bit of a skim coz you can see some pass marks in the mating surface. I think all the valves are there and probably useable. I'm open to sensible offers

Fatdog · Post by **Fatdog** » Fri Sep 02, 2016 3:52 pm

nuggitt wrote:A bit of a wire brushing and it'll be fine Dave.

So it's worth making an offer for then John?

Maybe Stig's right, a skim and use three head gaskets and it will be fine (of course I would have to hammer the bent valve straight first)!!

Post by **nugget** » Fri Sep 02, 2016 6:07 pm

If Stig doesn't get out on his bike soon. His head will start to look like that, and yes I'd make Stig an offer. I'd also order some new spark plugs in preparation.

Teego · Post by **Teego** » Fri Sep 02, 2016 7:18 pm

nuggitt wrote:If Stig doesn't get out on his bike soon. His head will start to look like that, and yes I'd make Stig an offer. I'd also order some new spark plugs in preparation.

Stig's too busy polishing his helmet to get out on his bike.

roadrunner · Post by **roadrunner** » Wed Sep 07, 2016 8:34 pm

Teego wrote:
Stig's too busy polishing his helmet to get out on his bike.

I can't believe you said that