Chinese puzzle fuse box

wonkiwheel · Post by **wonkiwheel** » Wed Apr 27, 2016 8:38 pm

Before I start sawing it to pieces can anyone give me any idea how to get the connectors out of my thunderace fuse box please.

Post by **Stig** » Wed Apr 27, 2016 9:09 pm

can you put a picture up so we know what we're dealing with?

wonkiwheel · Post by **wonkiwheel** » Wed Apr 27, 2016 10:31 pm

Will do

wonkiwheel · Post by **wonkiwheel** » Fri Apr 29, 2016 9:03 am

Post by **Stig** » Fri Apr 29, 2016 9:37 am

Those metal clips slide in from the back and then clip into the plastic moulding.
It should be possible to wedge the plastic aside (pond are very good for this) and push the metal out from the fuse side

Why do you need to strip it? Tha fittings look clean and solid in the pics

wonkiwheel · Post by **wonkiwheel** » Fri Apr 29, 2016 9:50 am

Cheers stig, the frayed brown/blue wire in the centre is causing intermittent hiccups and needs to be fixed. Its part of the ongoing investigation into my overcharging/rpm dip mystery.

wonkiwheel · Post by **wonkiwheel** » Fri Apr 29, 2016 6:13 pm

There are little tabs that can be sprised open with a thin screwdriver.