FZR 1000 Rear shock reservoir bottle

Mr_Incredible · Post by **Mr_Incredible** » Mon Apr 18, 2016 8:22 pm

Hi, I've just bought a H plate FZR 1000 EXUP which is a bit tired, while going over it I found that the rear shock bottle was just sitting on the engine, so two questions, where should it go. I know it should have a mount but that doesn't seem to be there so if someone can tell me or better still show me with a picture I'd be a very happy person. Secondly if you would like to make me even happier has someone got a mount/bracket with fittings they would like to sell me. Thanks

Post by **nugget** » Mon Apr 18, 2016 8:28 pm

Here you are Mr I.

BRACKET

Welcome to the forum by the way.

Mr_Incredible · Post by **Mr_Incredible** » Mon Apr 18, 2016 8:33 pm

Thx nuggit I'm currently watching that one, only problem is it doesn't have the rubber holder with it or bolt. And I don't know where it goes lol.

Post by **Stig** » Mon Apr 18, 2016 8:39 pm

The bracket on the earlier R model bolts to the rear of an aluminium frame cross member below the battery box

Btw, there's a full workshop manual to download in the tech section on the main site

Mr_Incredible · Post by **Mr_Incredible** » Mon Apr 18, 2016 8:57 pm

Looked at the thanks, sry to be a pain but I don't suppose you have a picture do you?

Post by **Stig** » Mon Apr 18, 2016 9:08 pm

Not got the can fitted in its original position on mine as I'm running Ohlins shock but if you follow the black pipes near the chain in the pic below, there's the bracket sticking out from the cross brace just at the bottom of the inner rear plastic mud guard
Hope it helps

Mr_Incredible · Post by **Mr_Incredible** » Mon Apr 18, 2016 9:15 pm

Brilliant, thanks loads, now to get the parts needed.

dustydes · Post by **dustydes** » Tue Apr 19, 2016 3:30 pm

P.M sent

Des

Mr_Incredible · Post by **Mr_Incredible** » Wed Apr 20, 2016 5:01 pm

Hi, I've had a look stig and mine doesn't have that sticky out bit??? I've took a picture to show you ( excuse the dirt

) so back to square one.

Post by **Stig** » Wed Apr 20, 2016 6:06 pm

Probably can see it as there's the battery box and inner mudguard in the way..... Mine was partly stripped when the pic was taken

dustydes · Post by **dustydes** » Thu Apr 28, 2016 5:26 pm

Picture of a spare frame I have, you can see mark left from bracket

[/img]