Thunderace downpipes

jatexup · Post by **jatexup** » Mon Jan 11, 2016 12:54 pm

Hi,

Anyone have or know of where there may be any decent downpipes for sale, as as a friend of mine needs to replace the rotted ones on his bike. Thanks.

Post by **nuggitt** » Mon Jan 11, 2016 1:02 pm

You need to see our stig on here. He usually has some hanging about his man cave.

jatexup · Post by **jatexup** » Mon Jan 11, 2016 1:05 pm

OK thanks!

Post by **Stig** » Mon Jan 11, 2016 1:50 pm

Hi, don't have a set for the ace at present but have a set for Fzr that'll fit if the ace rad is spaced forward slightly

http://www.ebay.co.uk/ulk/itm/151937323082

There's also a set on eBay.de

http://m.ebay.de/itm/YZF-1000-R-THUNDER ... 1755001224?

Post by **nuggitt** » Mon Jan 11, 2016 2:52 pm

Sorry about that. I think I need an eye test. I never noticed it was for a thunderace. Must try harder.

thunder_taz · Post by **thunder_taz** » Mon Jan 11, 2016 3:06 pm

The fzr ones fit fine and have the advantage of stainless headers rather than the aces mild steel ones. Also the end cans for the fzr are a slip on rather than bolt on so you get a much bigger selection of end cans available. I have a set ready to go on my ace after I have sorted out the exup valve.

jatexup · Post by **jatexup** » Fri Jan 15, 2016 5:56 pm

OK thanks everyone for the help and advice.

Billy Balthorpe · Post by **Billy Balthorpe** » Tue Mar 08, 2016 11:42 am

The Delkevic ones I got had the exup hole and bolt holes in it???

thunder_taz · Post by **thunder_taz** » Wed Mar 09, 2016 11:16 am

I bought a set of Delkevic pipes a few years ago and while they retained the exup valve they were mild steels same as oem and not stainless. The only stainless pipes as far as I kmow are made by Sandys Spares and do not retain the exup valve.

Post by **Stig** » Wed Mar 09, 2016 11:32 am

Fzr front pipes are stainless as far as the Exup housing, from there they are cast steel with mild steel outlet pipe

Exup 1000