Free parts.

Post by **Stig** » Sun Sep 14, 2014 4:03 pm

I have a front lever and def 1 grip...prob throttle side but will have to check

Yours foc mister

banner001 · Post by **banner001** » Sun Sep 14, 2014 4:10 pm

Cheers mr stig sir!

Do you need my address?

Post by **Stig** » Sun Sep 14, 2014 6:47 pm

still at 4DU???

banner001 · Post by **banner001** » Sun Sep 14, 2014 7:19 pm

That's the one, cheers paul!

exupbloke · Post by **exupbloke** » Sun Sep 14, 2014 7:24 pm

i can send you a bank of carbs without the diaphrams jets etc, you would need to swap over your needle jets etc as the ones fitted are worn. you can have them for free and get yourself a beer or 2 instead. pm your address if you want them and i will post em this week free p&P

joe111 · Post by **joe111** » Sun Sep 14, 2014 7:55 pm

set of carbs here for free complete untested pm me

banner001 · Post by **banner001** » Sun Sep 14, 2014 11:36 pm

Cheers guys, joe111 if you are still in cov/local area I'll come and get yours, I'll bring you a little something for them.

Cheers guys, means a lot to me.

Post by **nuggitt** » Mon Sep 15, 2014 8:12 am

Is there anything else you need John?

banner001 · Post by **banner001** » Mon Sep 15, 2014 9:49 am

ill be buying a new exhaust over the christmas period, if you have a link pipe and can (in any condition) ill take it and then bring it back, mine is like the original where the link pipe is welded to the back of the can, both are now bent/cracked.

i was going to repair the can with a new internal baffle/ carbon sleeve and packing but it looks like its been done before and i think ill be running out of places to drill new rivet holes, thats if i can get the dents out...

Post by **Stig** » Mon Sep 15, 2014 10:05 am

Banner, do you have a damaged fork lower thats being thrown away?

banner001 · Post by **banner001** » Mon Sep 15, 2014 10:28 am

Stig wrote:Banner, do you have a damaged fork lower thats being thrown away?

yes, both forks will be surplus to requirements.

the RH fork has a dent at the top and it might be slightly bent. from what i can remember the LH fork is ok as i dont think it took "a hit", it was still attached to both upper and lower triple clamps and all the electrics survived, the fork lowers are all ok, one of them had a damaged mudguard bolt, i think it was the RH one.

they have got your name on them if you want them, i can strip the lowers off for you no problem, ill post pictures tonight.

Post by **nuggitt** » Mon Sep 15, 2014 10:42 am

I did have a link pipe John but I gave it to roadrunner last year. It had a crack in it and Mike was going to weld it up as a spare. Not sure if he's got round to doing it yet. It was a link pipe that fitted my Micron end can so I'm not sure if it will fit yours or not?

If it will fit yours I'll be giving Mike a ring later so I could ask him if he still needs it.

Post by **Stig** » Mon Sep 15, 2014 8:59 pm

John,

Found the grip and a bar end weight too if you need one. I'm only able to finds 2 levers and they're both clutch side. I remember i have a complete brake MC somewhere but couldnt find it earlier...cant remember selling it

I'll have a better route in the garage when i feel well

Post by **nuggitt** » Mon Sep 15, 2014 9:14 pm

I've just been looking through my bits and I've find an adjustable front brake lever. I can't think why I bought it because I already have one fitted on the bike. Is it any good to you?

I've tried ringing Mike tonight re: link pipe but nobody picking up the phone.

Will keep trying.

rdgravy · Post by **rdgravy** » Mon Sep 15, 2014 9:35 pm

I think I've got a link pipe too. Not sure if it's standard. I'll have to dig it out and measure it. I've also got a bar end weight if it's of any use. I've got a set of mini indicators too. Nuggit will be able to tell you a bit more about them, he took them off and replaced them with some originals for me. Not too sure what else I've got until I can get to my garage. I don't think there's an awful lot more tho.