Stick coils

Hudders · Post by **Hudders** » Mon Jun 02, 2014 11:36 pm

Has anyone fitted a set of these to a 1000 RU?

Wondered what make and model would fit the Yam.

Any ideas anyone ?

banner001 · Post by **banner001** » Tue Jun 03, 2014 10:04 am

fitted cbr900 coils to my R model...no problems, i cant really compare it against stock as i never ran the bike with the stock coil packs.

there are plenty of guides and wiring diagrams on here.

Post by **nugget** » Tue Jun 03, 2014 10:22 am

Hello Hudders.

Dan one of our members and somebody else on the fzr1000 site fitted some stick coils to their RU's. This is all can find of the write up.

I'll go and have another search just incase I missed it first time.

http://fzronline.com/wiki/doku.php?id=c ... _plugs_mod

I've had another look Hudders and this is all I can find about it. Unfortunately Dan left the forum and a couple of photos have disappeared.

http://www.exup1000.co.uk/phpBB2/viewtopic.php?t=12581

banner001 · Post by **banner001** » Tue Jun 03, 2014 1:03 pm

thats all i did, i put a 4-pin connector on the end of my coil wiring, and then put another 4-pin connector on my loom, no way to connect them to the bike incorrectly then.

although if you want to keep the standard 2-pin connectors replace them with new ones, one pair black, one pair white...cant get confused that way then.

Vagabond · Post by **Vagabond** » Wed Jun 04, 2014 6:57 am

I recently fitted COP to my '89 EXUP (not RU) bike runs so much more smoothly now, even runs in the wet which is why I changed it. I used CBR600 COPs.

Solorider · Post by **Solorider** » Mon Jun 16, 2014 10:10 am

I have stick coils on my fazer 1000, I can't compare properly to the originals as one of my coils had a corroded pin which caused a misfire at low revs, since fitting the stick coils the misfire has gone but other than that everything feels the same.