The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Brolly Dolly
Posts: 10 Joined: Mon Jun 11, 2012 8:48 pm
Location: scotland
Post
by swanny123 Mon May 26, 2014 9:55 pm
hi all, I remember seeing a post on here a while ago where the fork was dismantled from the bottom, seals fitted etc , oil poured in the bottom then bolt refitted, does anyone know how I can find it , thanks
Brolly Dolly
Posts: 10 Joined: Mon Jun 11, 2012 8:48 pm
Location: scotland
Post
by swanny123 Mon May 26, 2014 9:57 pm
sorry I meant to say on a yzf 750
Lap Record Holder
Posts: 470 Joined: Fri May 30, 2008 7:01 pm
Location: St Helens
Post
by Pitbull Mon May 26, 2014 10:27 pm
It was posting by Joeboy, can't remember when it was posted, but it should be around somewhere,
Moderator
Posts: 5992 Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire
Post
by nugget Mon May 26, 2014 10:33 pm
I have a copy of it but I'm not home untill Wed's evening. I'm
Sure Stig will dig it out for you.
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Brolly Dolly
Posts: 10 Joined: Mon Jun 11, 2012 8:48 pm
Location: scotland
Post
by swanny123 Wed May 28, 2014 9:44 pm
ive checked his posts but still cant find it , could you send me it please nugget thanks
Moderator
Posts: 5992 Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire
Post
by nugget Wed May 28, 2014 10:24 pm
I've sent you a PM swanny.
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Brolly Dolly
Posts: 10 Joined: Mon Jun 11, 2012 8:48 pm
Location: scotland
Post
by swanny123 Thu May 29, 2014 9:21 pm
thanks mate, received in my e-mail , very much appreciated
