Carb Kits YZF 750

[DaddyA]

Hi all,

I have a few carb issues so going down the new seals route. I have seen these below, has anyone had any dealings with either that they can recommend?

http://litetek.co/Carb_Kit_Yamaha_YZF750.html

http://www.nrp-carbs.co.uk/shop/index.p ... ct_id=2712

I have also looked on the bay but they differ from the ones i have, however the FZR 1000 up to 95 look similar? are these compatible?

I will also be sticking in new needles/tubes and be setting the float heights. Hopefully be getting carb to head rubbers once M&P pull there finger out.

Thanks in advance for any guidance received.

[Stig]

also try Allens Performance

http://www.allensperformance.co.uk/

[Fatdog]

I've used the ones from NRP Carbs (Keyster Kit) which have worked fine.
They are Jap quality so they are well made.
NRP do the carb to head rubbers as well (my last lot came from there and again work fine).
Hope that helps.

[DaddyA]

Cheers for the replies, going to try Litetek as I'm not in too much of a rush.

I'll let you know what they are like when / if they turn up!