Factory Pro clutch mod

[Stig]

Had a spare basket so set up the mill with a ball nose cutter and took out the reliefs on the curve at the rear of the inner basket.
Dont think it turned out too bad for a first attempt. i've just got to sort the additional holes thro' the sides now

[Tiger]

You are just showing off the fancy electrical machinery.
That job can be achieved with nothing more involved than a # 4 thrunging broach and an 2hz flogging peen driven by a half brick bludgeon
I do not exaggerate when I state that I have done this millions of times !

[Lukather]

What are you doing ?

[creedxup]

You are just showing off the fancy electrical machinery.
That job can be achieved with nothing more involved than a # 4 thrunging broach and an 2hz flogging peen driven by a half brick bludgeon
I do not exaggerate when I state that I have done this millions of times !

An excellent use of the English language my good man.

[Lukather]

Go on then explain for us uninitiated? what will this achieve and how etc?

thanks

[Stig]

it allows oil to circulated further along the clutch plates at the rear of the basket...speads it about more
gives a smoother lever and better lubrication to the plates

http://www.factorypro.com/tech/clutch_y.html