A BIG ask

The place to come to share your technical expertise, or just find out what the little springy thing is that's just pinged out of sight under the work-bench.
Post Reply
banner001
Pit-lane Reporter
Pit-lane Reporter
Posts: 739
Joined: Tue Sep 25, 2012 3:50 pm
Location: Nuneaton, UK

Post by banner001 »

ive set an alarm on me fone, ill check the length and TP when i get home.
Current bikes:
1989 UK FZR 1000 EXUP-R Streetfighter @48,000 miles
1993 ZXR 400 L3 UK-spec Track-bike @21,000 miles
1994 ZXR 400 L4 UK-spec Commuter @48,000 miles
1999 Malaguti Phantom F12 scooter with 70cc kit+mods @14,000 miles
Top
banner001
Pit-lane Reporter
Pit-lane Reporter
Posts: 739
Joined: Tue Sep 25, 2012 3:50 pm
Location: Nuneaton, UK

Post by banner001 »

M7 x 16mm, 1.00mm thread pitch. normal right hand thread as well.

i got 3 screws and 3 nuts - makes me popular with the lady's :D

i can send it 1st class tomorrow morning if you let me know what/which you want.
Current bikes:
1989 UK FZR 1000 EXUP-R Streetfighter @48,000 miles
1993 ZXR 400 L3 UK-spec Track-bike @21,000 miles
1994 ZXR 400 L4 UK-spec Commuter @48,000 miles
1999 Malaguti Phantom F12 scooter with 70cc kit+mods @14,000 miles
Top
User avatar
EXUP FREAK
Founder Member
Founder Member
Posts: 3859
Joined: Sun Oct 02, 2005 6:23 pm
Location: WHO CARES

Post by EXUP FREAK »

put a m6 well nut in :D
a mind of useless information espesially on sundays
Top
User avatar
oldskoolexup
Motormouth
Motormouth
Posts: 1219
Joined: Sun Jul 19, 2009 11:45 am
Location: THE place...some are born here, some drawn here...Manchester

Post by oldskoolexup »

...might be worth looking at these too...



http://www.ebay.co.uk/itm/STEEL-RIBBED- ... 1098551664

like a pop rivet but threaded insert....can get in Aluminium too, I think...
Life begins at the end of your comfort zone,
Learn from the mistakes of others.............................
You can't live long enough to make them all yourself
&
Carpe Diem - seize the moment. Don't dream... Do!
Top
User avatar
nuggitt
Moderator
Moderator
Posts: 5968
Joined: Fri May 22, 2009 9:45 pm
Location: North Yorkshire

Post by nuggitt »

I thought I'd replied to this and say, I've got this little problem sorted out now. I tapped it out to 7mm and thanks to banner100 for sending me a couple of 7mm bolts to do the job with. :nod:

Thankyou for all your help lads. :thumbsup:
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Top
Post Reply

Return to “Workshop”