Fork question

murrukr1 · Post by **murrukr1** » Tue Mar 25, 2014 8:21 pm

Ok
I bought a set of 1989 exup 1000 forks to stick on my bike while I have mine re chromed , the adjusters are different as mine is a 1991 last of the rwu forks. My question is are the stanchions the same in which case I can send off the earlier ones and rebuild with the later internals.

Post by **Stig** » Tue Mar 25, 2014 8:40 pm

yes they're the same toobs and bottoms. Its just the adjusters on the tops thats changed

joeboy · Post by **joeboy** » Wed Mar 26, 2014 7:38 pm

Can you let me know if they do upside down lines and how much they charge.

murrukr1 · Post by **murrukr1** » Sun Apr 20, 2014 9:13 pm

I will ask them about usd and let you know

YAMAEXUP · Post by **YAMAEXUP** » Mon Apr 21, 2014 10:56 pm

It's a good idea to insert the stepped preload fork caps in place for while the fork legs are in transit. I sent off my forks for rechroming & when I got them back there was a flat on one edge of one fork leg...as though it had been dropped from a height & dinked it. With a cap in place this wouldn't have happened.