Exup import?

Start a discussion about anything you like here. Newbies please note, it's your round!
Post Reply
User avatar
robertcains
Spanner Monkey
Spanner Monkey
Posts: 134
Joined: Mon Mar 03, 2014 6:55 am
Location: Derbyshire

Exup import?

Post by robertcains »

So, I've bought a lifetime dream of a very tidy FZR1000R Exup, upon ordering parts for this bike my local bike shop say they think it might be an import due to the computer not fully recognising its number plate.

Computer apparently says 'Europe' instead of UK.

The log book states it was registered in the UK from new in Nov 89, anybody have any thoughts or info on this?
The only thing on the bike that confuses me are the mirrors, they are Thundercat style mirrors (square rather than rounded)
I'm intreagued to find out if I'm right or wrong, it won't make any difference to me as this bike is a labour of love & not a financial decision,

Cheers Nick
Nick
User avatar
rdgravy
Factory Rider
Factory Rider
Posts: 409
Joined: Mon Sep 24, 2012 8:59 pm
Location: Lincolnshire

Post by rdgravy »

Try a few bike shops just to be sure. The original mirrors are pretty poor if you want to see what's behind you so it wouldn't be a surprise to me if they'd been changed. It could just be a fault on the computer. :)
User avatar
robertcains
Spanner Monkey
Spanner Monkey
Posts: 134
Joined: Mon Mar 03, 2014 6:55 am
Location: Derbyshire

Post by robertcains »

Are there any physical differences when looking at the bike?
On most bikes there are clear differences in the models, being new to the FZR I'm learning (fast lol)
Nick
User avatar
skyerae
Factory Rider
Factory Rider
Posts: 371
Joined: Sat Oct 16, 2010 6:42 pm
Location: The Republic of Scotland

Post by skyerae »

My bike had the square mirrors fitted when I bought it about 8th hand. They do give you a better idea of what is behind you. I have bought square replacements as the old ones have had it.
If you can't do a job properly, don't do it at all !!!
User avatar
Teego
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2518
Joined: Tue Mar 14, 2006 11:48 am
Location: On the road again. Distance is the drug.

Post by Teego »

I'm sure if you post the frame number here someone will help you identify it.
Keep on keepin' on.
User avatar
robertcains
Spanner Monkey
Spanner Monkey
Posts: 134
Joined: Mon Mar 03, 2014 6:55 am
Location: Derbyshire

Post by robertcains »

Is it safe to post it publicly or am I a touch paranoid about 'ringers' lol
Whereabouts in Derbyshire are you Teego? May see you about?
Nick
undeadhairy
Test Rider
Test Rider
Posts: 325
Joined: Tue Aug 06, 2013 3:10 pm
Location: hull. east yorkshire

Post by undeadhairy »

I had the same problem with mine the reg an frame number was no help in asking for parts. I just had to guess :-(
User avatar
Teego
More Rabbit Than Sainsbury's
More Rabbit Than Sainsbury's
Posts: 2518
Joined: Tue Mar 14, 2006 11:48 am
Location: On the road again. Distance is the drug.

Post by Teego »

Here's a starting point for UK market bikes:
FZR 1000

UK
1987 1000 2RG 'Genesis'
1988 1000 2RG 'Genesis'
1989 1000 R 3LG1 (EXUP) (Twin Headlight)
1990 1000 R 3LG2 (EXUP) (Twin Headlight)
1991 1000 RU 3LG3 (EXUP) (Single Headlight) (USD Forks)
1992 1000 RU 3LG4 (EXUP) (Single Headlight) (USD Forks)
1993 1000 RU 3LG5 (EXUP) (Single Headlight) (USD Forks)
1994 1000 RU 3LG6 (EXUP) (Foxeye Headlight) (USD Forks)
1995 1000 RU 3LG7 (EXUP) (Foxeye Headlight) (USD Forks)

I found this on another site and it seems the key model identifier is the first four digits/letters on the frame. If you just post these up you will be safe.

I live near Wirksworth, 5 mins from Via Gellia. Tend to use the caff in the layby at the bottom. Had a Genesis from 1988 to 96, then a Foxeye Exup until 2010 and a GSXR 750K5 since then.
Keep on keepin' on.
User avatar
robertcains
Spanner Monkey
Spanner Monkey
Posts: 134
Joined: Mon Mar 03, 2014 6:55 am
Location: Derbyshire

Post by robertcains »

Ahh well now this is curious as mine start with
3LG-001

I'm just the other side of Chezzy Vegas so not far from you.
Nick
User avatar
BONLY1
Test Rider
Test Rider
Posts: 339
Joined: Thu Oct 06, 2005 8:41 pm
Location: Ormskirk Lancashire

Post by BONLY1 »

Hi Nick,
reading Haynes identification numbers .........
3LG1 - UK ( 3LG-000101 ) for 1989 models
'g' appears to denote UK variants for all years.
IF IT AIN'T BROKE - FIX IT 'TILL IT IS.
User avatar
robertcains
Spanner Monkey
Spanner Monkey
Posts: 134
Joined: Mon Mar 03, 2014 6:55 am
Location: Derbyshire

Post by robertcains »

Thanks guys, UK bike then & a stoopid computer not picking up an elderly machine ;-)
Nick
undeadhairy
Test Rider
Test Rider
Posts: 325
Joined: Tue Aug 06, 2013 3:10 pm
Location: hull. east yorkshire

Post by undeadhairy »

I had the same problem with mine the reg an frame number was no help in asking for parts. I just had to guess :-(
User avatar
roadrunner
Factory Rider
Factory Rider
Posts: 399
Joined: Tue Feb 02, 2010 3:18 pm
Location: Hull. East Yorkshire.

Post by roadrunner »

I bought a '90 model for spares that had come from Italy. The frame number starts 3GM. In addition there is also an identification plate riveted to the frame box section just behind the frame number stamped into the head stock. Perhaps imported bikes have this ID plate fixed to the frame? I know my '89 exup doesn't have one. Incidentally that bike's frame number starts 3LG.

Hope this is of help :nod:
With age comes wisdom.......and senility!!! Who are you again?
User avatar
robertcains
Spanner Monkey
Spanner Monkey
Posts: 134
Joined: Mon Mar 03, 2014 6:55 am
Location: Derbyshire

Post by robertcains »

Thanks roadrunner, everything you guys are telling me is making me think it's a UK bike thankfully, appreciate your input
Nick
Post Reply