OEM loom connectors

banner001 · Post by **banner001** » Thu Feb 27, 2014 9:37 pm

Hi guys. Do you know if i can buy oem loom connectors from a dealer? I cant see any on parts diagrams...might look later on ebay. Someone must have broke one or had a damaged one. Is the only solution a new loom? More specifically while de-wiring my bike ive managed to cut a wire for.the relay box that i didnt.mean to...and ive clipped it right at the base like an idiot...

Post by **creedxup** » Thu Feb 27, 2014 10:28 pm

If it's a 91-93 I have an old loom that I can cut up for you.

I can send you that whole branch for you to graft on.

Send me some money to cover post and it's yours.

banner001 · Post by **banner001** » Fri Feb 28, 2014 10:57 am

its a '89 unfortunatly, unless the relay is the same, its an 11-pin block, im gonna ring the dealer today, but i think it will be a no...

failing that, how on earth can you get the pins out of the connector block?

banner001 · Post by **banner001** » Fri Feb 28, 2014 6:37 pm

fixed it now.

not ideal, but what im gonna do (so it can all be brand new) is to fit single brass female connectors to the relay and then wire them (in order) to a pair of 6-connectors so it will basically look like the original, then wrap the relay up in loads of electrical tape...its all gonna go under the seat in the end anyway.

banner001 · Post by **banner001** » Fri Feb 28, 2014 6:45 pm

basically, i dont see the point of me doing a full re-wire, to then use the old corroded connectors from my old loom, so ill probably do all the connections as above.

it will be fine, but will be a bit of a ballache if i need to change an electrical component...but never mind, ill sort that out when i come to it

itsnotagenesis · Post by **itsnotagenesis** » Sat Mar 01, 2014 12:01 am

A few years ago I got some connectors from here
http://www.sgmotorsport.co.uk/
Better than using individual bullet connectors and keeps it looking fairly original

Post by **creedxup** » Sat Mar 01, 2014 9:21 pm

The relay and that part of the loom are the same as the RU one,,you can have that bit if you want ?

dangerousdave · Post by **dangerousdave** » Mon Mar 03, 2014 10:23 pm

creedxup wrote:The relay and that part of the loom are the same as the RU one,,you can have that bit if you want ?

Hi Chris,Could do with some wiring connector blocks/plugs for the front end to connect clocks, indicators,head lights quite a bit of the top end, if you don't end up getting rid I'll have the lot off you if you wouldn't mind, let me know Chris and how much you would like.
Cheers Dave

banner001 · Post by **banner001** » Tue Mar 04, 2014 10:17 am

hi chris/dave, i think ive found a solution to my issues, thanks for the offer of the loom but im going to try it a different way first.

so dangerousdave, its all yours

dangerousdave · Post by **dangerousdave** » Tue Mar 04, 2014 6:11 pm

Cheers Banner, but come to think about it I need the male side of the connectors the and not the loom side, never mind ill sort something out .
Dave

Post by **Stig** » Wed Mar 05, 2014 10:19 pm

what about these...

www.vehicleproducts.co.uk

dangerousdave · Post by **dangerousdave** » Wed Mar 05, 2014 10:35 pm

Cheers stig

banner001 · Post by **banner001** » Thu Mar 06, 2014 11:54 am

thats where ive been buying all my wire for the new loom, ill buy most of my connectors from there as well - only problem is they only do multiconnectors in white, and i need a few other colours.

itsnotagenesis · Post by **itsnotagenesis** » Thu Mar 06, 2014 10:34 pm

banner001 wrote:thats where ive been buying all my wire for the new loom, ill buy most of my connectors from there as well - only problem is they only do multiconnectors in white, and i need a few other colours.

The link I put on earlier has different colours with different amounts of pins in each block ranging from 2 pin up to 9 I think.

itsnotagenesis · Post by **itsnotagenesis** » Thu Mar 06, 2014 10:35 pm

Its under motorcycle hitachi connectors