Dog bones

simonb · Post by **simonb** » Sun Mar 02, 2014 4:59 pm

What size am i looking for to give the most lift to the seat height.
Need a little more leg room.
Thanks

undeadhairy · Post by **undeadhairy** » Sun Mar 02, 2014 5:27 pm

Ask stig. He's a bit tied up at the moment. He'll be with you shortly.

YAMAEXUP · Post by **YAMAEXUP** » Mon Mar 03, 2014 9:12 am

The standard dog bones are 165mm between centres, so I made up some of 160 & 155 lengths to see what happened. The 160s raised the back end by about 25mm, whereas the 155s raised the back by about 40mm. But this didn't give me more leg room. Raising the seat height by adding more foam would do that.

But the bike handles better with the 160s fitted

Post by **Stig** » Wed Mar 05, 2014 10:01 pm

As above, the 155's are the shortest bones with greatest lift without the shock fouling the hole in the swingarm

I can supply them in 6mm stainless at any length you want and at a bit cheaper than what I can do them for on ebay

simonb · Post by **simonb** » Thu Mar 06, 2014 12:20 am

155 might be the way to go then.
Want as much lift as poss without running into problems.
Could you post or pm me a price please.
Thanks
Simon

Post by **Stig** » Thu Mar 06, 2014 12:37 am

you have PM sir .......