Post your pictures here: your bikes, meets you've attended, modifications you've made, x-rays you've had taken...
Stig
Site Admin
Posts: 11786 Joined: Wed Sep 28, 2005 7:54 amLocation: Searching for my bike
Post
by Stig Sat Jan 04, 2014 11:27 pm
Stripped some carbs from FZR1000 EXUP (believed to be RU model) and came across these needles
Are they factory pro items as all the ones I've ever dealt with from std carbs have been tapered and not parallel like the one in the image below
AKA Bald headed b'stard
Fatdog
Test Rider
Posts: 295 Joined: Wed Jun 12, 2013 8:44 pmLocation: East Yorkshire
Post
by Fatdog Sun Jan 05, 2014 11:27 am
I think they are dyno jet needles. I'm sure the factory pro one's are tapered like the standard type.
1993 YZF750R
creedxup
Parts department
Posts: 2556 Joined: Fri Oct 14, 2005 11:51 amLocation: hastings sussex
Post
by creedxup Sun Jan 05, 2014 11:42 am
Looks like Dynojet needle s to me.
1992 RU midnight blue, Wiseco 1070, 6 speed, r1 calipers, ducati discs , 157 bhp crank, Ohlins shock
Stig
Site Admin
Posts: 11786 Joined: Wed Sep 28, 2005 7:54 amLocation: Searching for my bike
Post
by Stig Sun Jan 05, 2014 12:01 pm
You may be right. I found a spacer washer under the needle clip to give a half notch. I believe this is something used in the Dynojet sets.....
AKA Bald headed b'stard
creedxup
Parts department
Posts: 2556 Joined: Fri Oct 14, 2005 11:51 amLocation: hastings sussex
Post
by creedxup Sun Jan 05, 2014 4:00 pm
Stig wrote: You may be right. I found a spacer washer under the needle clip to give a half notch. I believe this is something used in the Dynojet sets.....
It certainly is.
1992 RU midnight blue, Wiseco 1070, 6 speed, r1 calipers, ducati discs , 157 bhp crank, Ohlins shock
