The bar muffs look good, good on ya for going out on your zxr 400 in the winter, but going by the weather reports , your gonna need spiked tyres , just like the yamaha R1 video on you tube, its mad
banner001 wrote:am just doing the valve clearances on the zxr whilst the road outside out house is solid ice...so its the bus for the next week
I done these on my wifes old ZXR.
I thought it was great being able to do them without removing the cams.
my only problem is trying to get to the inlet shims at the very edges of the cam...have ordered some small neodymium magnets...should be able to get to them with that one
mine are all tight, looking for a place to buy shims from now.
banner001 wrote:am just doing the valve clearances on the zxr whilst the road outside out house is solid ice...so its the bus for the next week
I done these on my wifes old ZXR.
I thought it was great being able to do them without removing the cams.
my only problem is trying to get to the inlet shims at the very edges of the cam...have ordered some small neodymium magnets...should be able to get to them with that one
mine are all tight, looking for a place to buy shims from now.
Yep done it with a pen magnet and some metal picks to hold it in place while removing the magnet